DTC 2706: Gyro Diag: ECU Temp XX°C

NOTE: 

• Check the vehicle 12 volt battery condition first .
• This navigation DTC sets when there is a problem with the internal gyro (the Yaw Sensor icon is red in the System Links), and indicates the navigation ECU temperature when the DTC is detected.
• Before you troubleshoot, make sure to follow the General Troubleshooting Information .
• Check any official Honda service website for more service information about the navigation system.

• 1. Problem verification:

  1. Clear the hard error codes .

  2. Turn the vehicle to the OFF (LOCK) mode then the ON mode.

  3. Check for hard error codes .

  Is DTC 2706 indicated?

  YES 

  Replace the audio-navigation unit .

  NO 

  Intermittent failure, the system is OK at this time.