Left/Right Channel ID

Left/Right Channel ID 

Do this test to confirm proper channel routing.

1. Insert the audio Diagnostic CD (07AAZ-SDBA100) into the audio-navigation unit or the audio unit

2. Play track No. 1 (left, both, right channel ID) at a normal, or slightly higher than normal, volume level

3. The voice should be audible only from the channel or channels when indicated.

• If the channel ID is correct for each side, go to Phase Test.
• If the channel ID is not correct, check for:
• • Shorted speaker wire
  • Faulty audio-navigation unit or audio unit
  • Faulty stereo amplifier
  • Shorted speaker
  • Open in speaker wire
  • Loose connection or poor pin fit