Pairing a Cell Phones (with normal audio)
Pairing a Cell Phones (with normal audio)
1. Turn the vehicle to the ACCESSORY mode, and Make sure the cell phone you are pairing is on and in its discovery mode
2. Wait until the time appears on the screen
3. Press the PHONE button on the audio unit, then select Yes on the confirmation screen by pressing the SELECTOR knob. If none of the previously paired cell phones are in the vehicle, a phone confirmation screen appears stating there is no cell phone connected. Select No to go to the Phone Setup menu.
4. The HFL menu appears on the display. Rotate the SELECTOR knob to highlight Phone Setup, then press the SELECTOR knob.
5. On the Phone Setup screen, rotate the SELECTOR knob to highlight Connection, then press the SELECTOR knob.
6. Highlight Add a New Phone, then press the SELECTOR knob.
7. At the Select Location Screen, select an open cell phone location, then press the SELECTOR knob.
8. Confirm the cell phone is in its discovery mode, then press the audio unit SELECTOR knob
9. Once the cell phone is discovered by the HFL, rotate the SELECTOR knob to select the phone, then press the SELECTOR knob.
NOTE: If the HFL does not find a phone, select cell phone Not Found? from the menu, then, when prompted, enter the PIN into the phone.
10. When the 4-digit pairing code appears on the audio display, enter this code into the cell phone
11. Once the cell phone is successfully paired, the screen displays (phone name) PHONE has been added.
