Required Special Tools And Equipment (A99-018)
WARNING: This page is about the CR-V EX, Eng CD K24V1, which is a different variant/trim than selected.
Publication date: 2024-08-23Reference number: A99-018
Supersedes refnos: 99-018
REQUIRED SPECIAL TOOLS AND EQUIPMENT
SERVICE CAMPAIGN BULLETIN
Reference Number(s): 99-018, Date of Issue:
August 23, 2024
| HONDA: | All Models |
NOTE:
Supersedes 99-018, dated June 26, 2024, to revise the information highlighted in yellow.
AFFECTED VEHICLES
AFFECTED VEHICLES
| Year | Model | Trim | VIN Range |
|---|---|---|---|
| ALL | ALL | ALL | ALL |
REVISION SUMMARY
- Under EV DRIVETRAIN, OVERSIZED TOOLS, and GENERAL SHOP EQUPMENT, some part numbers have been updated.
- Under EV DRIVETRAIN and OVERSIZED TOOLS, new tools were added.
BACKGROUND
In accordance with the Automobile Sales and Service Agreement, Section 3.9, your service department is required to have, at a minimum, the tools and equipment listed in this bulletin.
When a new model is introduced and requires special tools, those tools may be shipped to you automatically. If you receive a required special tool and believe you have an equivalent, refer to the Honda Service Operations Manual, Section 11, for the procedure to return items distributed through the Honda Tool and Equipment Program.
This service bulletin is broken down into two groups: 1. Special Tools, specifically designed for a Honda service/repair procedure and not available from other sources or vendors, and 2. Special Tools and Equipment that are commercially available.
All tools and equipment have been tested by Honda Motor Co., Ltd. and/or American Honda Motor Co., Inc. Special Tools.
REQUIRED SPECIAL TOOLS
These tools are available from American Honda. Use normal parts ordering procedures.
Use the Inventory (YIN) column to identify the tools you already have or do not have.
Barcodes have been added to make ordering and inventory easier. Refer to the Tool & Equipment Program for more details on barcode scanners.
The drawer numbers in this bulletin are for the updated tool storage system. For more detail on the new 5 Cabinet storage set, refer to the Tool & Equipment Program on the iN.
AXLE/DIFFERENTIAL TOOLS
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 07JAD-PL9A100 | 9 | OIL SEAL DRIVER | 1 | ||
| 07JAD-PN00100 | 9 | OIL SEAL DRIVER ATTACHMENT | 1 | ||
| 07JMB-MN50200 | 9 | MAINSHAFT HOLDER | 1 | ||
| 07LAD-PW50601 | 9 | ATTACHMENT, 40 x 50 mm I.D. | 1 | ||
| 07LAD-SM4A100 | 9 | ATTACH, SEAL DRIVER | 1 | ||
| 07LAF-SM40300 | 9 | SUPPORT BASE | 1 | ||
| 07MAD-R90100 | 9 | ATTACHMENT, 45 x 55 mm I.D. | 1 | ||
| 07NAD-PX40100 | 9 | DRIVER ATTACHMENT, 78 x 80 mm | 1 | ||
| 07PAB-001A300 | 9 | SPLINE SHAFT HOLDER | 1 | ||
| 07XAD-001000A | 9 | SEAL DRIVER ATTACHMENT | 1 |
BODY TOOLS
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 07AAC-6B2A100 | 18 | AC PULLEY ADAPTOR | 1 | ||
| 07AAC-THRA100 | 26 | 90 DEGREE FAKRA A PULLER | 1 | ||
| 07AAC-THRA200 | 26 | STRAIGHT FAKRA PULLER | 1 | ||
| 07AAC-TJBA100 | 26 | 90 DEGREE FAKRA B PULLER | 1 | ||
| 07AAF-SNAA150 | 19 | SEAT BELT BUCKLE TOOL | 1 | ||
| 0 AAF-T2AA200 | 18 | TRUNK SPRING TOOL | 1 | ||
| 07AAF-TGVA100 | 19 | AIRBAG COVER REMOVER | 1 | ||
| 07AAH-TLAA100 | 18 | 28MM HOLE PUNCH | 1 | ||
| 07AAJ-SJCA100 | 33 | CORROSION INSPECTION | 1 | ||
| 07AAJ-TA0AA00 | 26 | PSPI6 | 1 | ||
| 07AAM-TLAA1N0 | 27 | HD TRAFFIC UPDATE | 1 | ||
| 07AAU-TGGA1A0 | 27 | AUDIO SYSTEM UPDATE, | 1 | ||
| 07XAK-PFCA100 | 20 | 12MM ENGINE HANGER | 1 | ||
| 070AZ-SAA0100 | 19 | SHORT CANCELLER PIN SET | 2 | ||
| 070AZ-SCAA120 | 19 | SRS PIN TOOL SET | 1 | ||
| 070AZ-SDAA100 | 27 | TEST HARNESS-ALPINE | 1 | ||
| 070AZ-SDAA200 | 27 | TEST HARNESS-STANLEY | 1 | ||
| 070AZ-SNAA100 | 19 | SRS TEST LEAD J | 1 | ||
| 070AZ-SNAA200 | 19 | SRS TEST LEAD K | 1 | ||
| 070AZ-SNAA300 | 19 | SRS TEST LEAD L | 1 | ||
| 070AZ-SNAA400 | 19 | SRS TEST LEAD M | 1 | ||
| 070AZ-TK8A100 | 19 | SRS TEST LEAN N | 1 | ||
| 07AAA-SEPA100 | 18 | CARGO CAP SCREW SOCKET | 1 | ||
| 07AAC-SJAA100 | 18 | PUSH PIN PULLER | 1 | ||
| 07AAC-TA0A100 | 18 | EXTRACTOR TOOL | 1 | ||
| 07AAC-TLAA100 | 18 | SQUIB COUPLER PULLER | 10 | ||
| 07AAD-TA5A140 | 20 | WEDGE INSTALLER KIT | 1 | ||
| 07AAE-000A100 | 18 | RIVET NUT TOOL, 6 mm | 1 | ||
| 07AAE-S04A120 | 18 | IGNITER TERM CRIMPER | 1 | ||
| 07AAE-STXA100 | 18 | RIVNUT TOOL, 6 mm LONG | 1 | ||
| 07AAE-TZ5A100 | 18 | CLIP RELEASE TOOL | 1 | ||
| 07AAF-2GAA100 | 18 | MESHING TOOL | 1 | ||
| 07AAF-SNAA100 | 18 | TRUNK SPRING TOOL | 1 | ||
| 07AAF-TG7A100 | 19 | BELT BUCKLE RELEASE | 1 | ||
| 07AAF-TM0A100 | 26 | JAE RELEASE TOOL | 1 | ||
| 07AAG-SJCA100 | 20 | STEP GAUGE | 1 | ||
| 07AAG-SJCA200 | 20 | HINGE ALIGN TOOL | 1 | ||
| 07AAG-TK8A100 | 20 | SEAT SLIDER ADJUSTER LEVER | 1 | ||
| 07AAH-TZ5A100 | 18 | HOLE PUNCH, 16 MM | 1 | ||
| 07AAJ-000A200 | 27 | TEST ANTENNA | 1 | ||
| 07AAC-000A2A1 | 26 | RELAY PULLER (10PK) | 1 | ||
| 07AAC-001A101 | 18 | PUSH PIN/CAP PLIERS | 1 | ||
| 07AAC-S3VA100 | 18 | VENT PANEL PULLER | 1 | ||
| 07AAC-S84A100 | 18 | IGNITION SWITCH CYLINDER PULLER | 1 | ||
| 07AAC-S84A200 | 18 | PIN PUNCH | 1 | ||
| 07AAC-S84A201 | 18 | EXTRACTOR PIN | 1 | ||
| 07AAC-SDAA100 | 18 | PANEL/VENT REMOVAL TOOL | 1 | ||
| 07AAJ-000A300 | 26 | RADIO ANT 3-PIN LEAD | 1 | ||
| 07AAJ-000A600 | 26 | ANT REV 3-PIN ADAPTER | 1 | ||
| 07AAJ-000A700 | 26 | ADAP, BRL CON (LRG-SM) | 1 | ||
| 07AAJ-SJAA100 | 26 | BODY GAP GAUGE (5PK) | 1 | ||
| 07AAJ-TM0A100 | 26 | RADIO ANTENA TEST LD | 1 | ||
| 07AAJ-TM0A200 | 26 | RADIO ANTENA TEST (TCH) | 1 | ||
| 07AAU-T2FA1A0 | 27 | 2016 ACCORD AUDIO SYSTEM UPDATE | 1 | ||
| 07AAU-TBAA1A0 | 27 | 2016 CIVIC AUDIO SYSTEM UPDATE | 1 | ||
| 07AAU-TBAA2A0 | 27 | 2016 CIVIC AUDIO SYSTEM UPDATE | 1 | ||
| 07AAU-TBAA3A0 | 27 | 2016 CIVIC TOURING AUDIO AMP UPDATE | 1 | ||
| 07AAU-TG7A1A0 | 27 | 2016 PILOT AUDIO SYSTEM UPDATE | 1 | ||
| 07AAU-TVAA1D0 | 27 | DISPLAY AUDIO UPDATE, USB DRIVE | 1 | ||
| 07AAZ-TXMA100 | 26 | BATTERY TERMINAL LUG EXTENSION | 1 | ||
| 07AAK-SNAA220 | 20 | ENGINE HANGER ADAPTER SET | 1 | ||
| 07AAK-SNAA400 | 20 | SUPPORT EYELET 1.8 | 1 | ||
| 07AAK-TA5A140 | 20 | BODY WEDGE (4PK) | 1 | ||
| 07AAZ-S0KA100 | 18 | TRUNK SPRING TOOL | 1 | ||
| 07AAZ-SDAA100 | 27 | 15-PIN BREAKOUT BOX | 1 | ||
| 07AAZ-SDBA100 | 27 | AUDIO DIAGNOSTICS CD | 1 | ||
| 07AAZ-SDBA400 | 27 | ABEX TEST CD SCD8700 | 1 | ||
| 07AAZ-SHJA100 | 33 | CONNECTOR GREASE KIT | 1 | ||
| 07AAZ-TG7A200 | 27 | 2016 PILOT USB UPDATE | 1 | ||
| 07AAZ-TR0A101 | 27 | AUDIO UPDATE DISC | 1 | ||
| 07AAZ-TR0A200 | 27 | UPDATE DISK | 1 | ||
| 07AAZ-TR0A300 | 27 | CIVIC IMID UPDATE | 1 | ||
| 07AGG-SDAA220 | 27 | HONDA NANI PATCH CD | 1 | ||
| 07AGJ-000A1A0 | 26 | PCM (1mm) (10) | 1 | ||
| 07AGJ-000A2A0 | 26 | PCM 64 mm TEST PIN | 1 | ||
| 07AGJ-000A3A0 | 26 | ABS 4.8 mm TEST PIN 10 | 1 | ||
| 07AGJ-000A4A0 | 26 | ABS 1.5 mm TEST PIN 10 | 1 | ||
| 07AGJ-000A5A0 | 26 | PIN FIT GAUGE, 0.4 MM | 1 | ||
| 07AGJ-000A6A0 | 26 | ABS 2.8 mm TEST PIN 10 | 1 | ||
| 07AGK-000A1A0 | 26 | RLY SKT EXT, 4 PIN | 1 | ||
| 07AGK-000A2A0 | 26 | RLY SKT EXT, 5 PIN | 1 | ||
| 07JAA-001000D | 26 | ANTENNA NUT WRENCH | 1 | ||
| 07RAA-001010A | 26 | DOOR HINGE WRENCH | 1 | ||
| 07SAZ-TB4011A | 19 | SRS INFLATOR SIMULATOR | 1 | ||
| 07SAZ-TB4012A | 19 | SRS SIMULATOR LEAD A | 1 | ||
| 07SAZ-TB4013A | 19 | SRS SIMULATOR LEAD B | 1 | ||
| 07TAZ-SZ5011A | 19 | SRS SIMULATOR LEAD C | 1 | ||
| 07TAZ-TB5011A | 19 | SRS SIMULATOR LEAD D | 1 | ||
| 07XAA-0010200 | 26 | ANTENNA NUT WRENCH, 4 PIN | 1 | ||
| 07XAZ-S1A0100 | 19 | SRS TEST BOX | 1 | ||
| 07XAZ-S1A0200 | 19 | SRS SIMULATOR LEAD E | 1 | ||
| 07XAZ-SZ3A100 | 19 | SRS SIMULATOR LEAD F | 1 | ||
| 07XMJ-001000A | 26 | TERMINAL INSPECTION FEELER SET | 2 | ||
| 07YAZ-S3AA100 | 19 | SRS SIMULATOR LEAD H | 1 | ||
| 07ZAA-S0XA101 | 20 | CABLE/EYEBOLT ASSY | 1 | ||
| 07AAB-TVAA100 | 18 | G-MASS HOLDER | 1 | ||
| 07AAC-TVAA100 | 18 | SEAT BELT BUTTON REMOVER | 1 | ||
| 07AAJ-TZ5A100 | 18 | BLOWER COVER HOLE GAUGE | 1 | ||
| 07AAG-SWAA2 00 | 18 | 3/8 X 3/4 DRILL GUIDE | 1 | ||
| 07-EL-38826-200 | 19 | SIR DEPLOYMENT HARNESS JUMPER | 1 | ||
| 07-J-38826-1 | 19 | EXTENSION CABLE | 1 | ||
| 07-EL-52488 | 20 | REMOVER, APO SOCKET | 1 | ||
| 07-EL-50334-50 | 26 | DIAG KIT, AUDIO & INFOTAINMENT | 1 | ||
| 07-EL-52552-50 | 26 | COAX CABLE FAKRA TEST KIT | 1 | ||
| 07-EL-48028 | 26 | ANTENNA, SAT RADIO | 1 | ||
| 07-EL-51755-A | 26 | TESTER, WIRELESSCHARGE | 1 |
COMMON BEARING/SEAL DRIVERS
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 07947-6340400 | 28 | D DRIVER ATTACHMENT | 1 | ||
| 07947-6340500 | 28 | DRIVER ATTACHMENT | 1 | ||
| 07736-A01000B | 28 | ADJ BRG PULLER, 25-40 mm | 1 | ||
| 07746-0010100 | 28 | ATTACHMENT 32 x 35 mm | 1 | ||
| 07746-0010200 | 28 | ATTACHMENT 37 x 40 mm | 1 | ||
| 07746-0010300 | 28 | ATTACHMENT 42 x 47 mm | 1 | ||
| 07746-0010400 | 28 | ATTACHMENT 52 x 55 mm | 1 | ||
| 07746-0010500 | 28 | ATTACHMENT 62 x 68 mm | 1 | ||
| 07746-0010600 | 28 | ATTACHMENT 72 x 75 mm | 1 | ||
| 07746-001A800 | 28 | ATTACHMENT 22 x 24 mm | 1 | ||
| 07746-0030100 | 28 | DRIVER 40 mm I.D. | 1 | ||
| 07746-0030200 | 28 | ATTACHMENT, 25 mm I.D. | 1 | ||
| 07746-0030300 | 28 | ATTACHMENT, 30 mm I.D. | 1 | ||
| 07746-0030400 | 28 | ATTACHMENT, 35 mm I.D. | 1 | ||
| 07749-0010000 | 28 | DRIVER | 1 | ||
| 07945-3710101 | 28 | DRIVER | 1 | ||
| 07947-6110501 | 28 | SEAL DRIVER ATTACHMENT | 1 | ||
| 07947-6340300 | 28 | DRIVER ATTACHMENT, C | 1 | ||
| 07949-3710001 | 28 | DRIVER HANDLE | 1 | ||
| 07HAD-SG00100 | 28 | BEARING DRIVER ATTACHMENT | 1 | ||
| 07JAD-PH80200 | 28 | PILOT, 26 x 30 mm | 1 | ||
| 07JAD-PH80400 | 28 | PILOT, 28 x 30 mm | 1 | ||
| 07YAC-0010102 | 28 | ADJ PULLER, 45-75 mm | 1 | ||
| 07YAC-001A200 | 28 | ADAPTER, 8 mm x 3/8-16" | 1 |
ENGINE TOOLS
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 07AAB-6S9A100 | 14 | CAM PULLEY HOLDER | 1 | ||
| 07AAD-6S9A100 | 1 | CAM SEAL DRIVE | 1 | ||
| 07AAJ-6S9A100 | 2 | AIR M8X1.25 ADAPTOR | 1 | ||
| 070AD-5K0A100 | 2 | VALVE STEM SEAL DRIVER | 1 | ||
| 070AD-RCAA100 | 1 | DRIVER, 64 mm | 1 | ||
| 070AE-5K0A100 | 2 | VALVE SPRING COMPRESSOR ATTACHMENT | 1 | ||
| 070AF-PWCA110 | 1 | PILOT PIN | 1 | ||
| 070AF-PWCA120 | 1 | INSERT ADJUST | 1 | ||
| 070AF-PWCA130 | 1 | PILOT COLLAR OD 18 mm | 1 | ||
| 070AJ-001A101 | 2 | VCM AIR ADAPTER | 1 | ||
| 07742-0010100 | 2 | VALVE GUIDE DRIVER | 1 | ||
| 07908-590000A | 14 | VALVE ADJ. WRENCH, 10 mm | 1 | ||
| 07942-6570100 | 2 | VALVE GUIDE DRIVER | 1 | ||
| 07947-SB00200 | 1 | DRIVER OIL SEAL | 1 | ||
| 07947-SB0A100 | 1 | DRIVER, OIL SEAL | 1 | ||
| 07973-657A500 | 1 | PISTON BASE | 1 | ||
| 07973-657A600 | 1 | PISTON BASE SPRING | 1 | ||
| 07973-PE00310 | 1 | SHAFT | 1 | ||
| 07973-PE00320 | 1 | HEAD | 1 | ||
| 07973-PE00400 | 1 | PISTON PIN BASE INSERT | 1 | ||
| 07984-657010D | 2 | VALVE GUIDE REAMER, 6.6 mm | 1 | ||
| 07AAA-PAAA100 | 14 | OIL FILTER WRENCH | 1 | ||
| 07AAA-PLCA100 | 14 | OIL FILTER WRENCH, 65 mm | 1 | ||
| 07AAA-RWKA150 | 1 | BELT TENSIONR SOCKET (5) | 1 | ||
| 07AAB-5K0A100 | 3 | PULLEY HOLDER | 1 | ||
| 07AAB-RJAA100 | 3 | TAPERED HOLDER, 65 mm | 1 | ||
| 07AAB-RNAA150 | 1 | HOLDING PIN | 1 | ||
| 07AAB-RWCA120 | 1 | CAMSHAFT LOCK PIN SET | 1 | ||
| 07AAB-TK8A100 | 2 | ALT OAD PULLEY HOLDER | 1 | ||
| 07AAD-RCAA300 | 14 | OIL SEAL DRIVER | 1 | ||
| 07AAE-5K0A100 | 2 | VALVE SPRING COMPRESSOR ATTACHMENT | 1 | ||
| 07AAE-5K0A200 | 2 | VALVE SPRING COMPRESSOR ADAPTER | 1 | ||
| 07AAJ-PNAA101 | 13 | AIR REGULATOR | 1 | ||
| 07AAJ-R70A100 | 2 | VTEC AIR STOP TOOL, A | 1 | ||
| 07AAJ-R70A200 | 2 | NTEC AIR STOP TOOL, B | 1 | ||
| 07AAJ-R70A301 | 14 | CYLINDER INSPECTION TOOL | 1 | ||
| 07AAJ-RWCA100 | 1 | CHAIN INSPECTION TOOL | 1 | ||
| 07AAK-RMEA100 | 2 | NTEC AIR ADAPTER | 1 | ||
| 07AAK-RMEA2 0 0 | 2 | NTEC AIR STOPPER | 1 | ||
| 07AAZ-P8AA100 | 2 | AIR QUICK CONNECTOR | 1 | ||
| 07AAZ-TA5A100 | 14 | GROOVE CLEANER | 1 | ||
| 07GAD-PH70201 | 1 | SEAL DRINER | 1 | ||
| 07GAF-PH70100 | 1 | COLLAR, PILOT | 1 | ||
| 07HAH-PJ7A100 | 2 | GUIDE REAMER, 5.5 mm | 1 | ||
| 07JAA-001010A | 3 | SOCKET, 17 mm | 1 | ||
| 07JAA-001020A | 3 | SOCKET, 19 mm | 1 | ||
| 07JAB-001010B | 3 | HOLDER ATTACHMENT PIN TYPE | 1 | ||
| 07JAB-001020B | 3 | HOLDER HANDLE | 1 | ||
| 07LAD-PT3010A | 1 | SEAL DRINER | 1 | ||
| 07LAJ-PR3020B | 2 | AIR STOPPER | 1 | ||
| 07MAA-PR70110 | 14 | TAPPET ADJUSTER | 1 | ||
| 07MAA-PR70120 | 14 | TAPPET LOCK NUT WRENCH | 1 | ||
| 07MAB-PY3010B | 3 | HOLDER ATTACHMENT 50 mm OFFSET | 1 | ||
| 07NAB-001040A | 3 | HOLDER ATTCHMENT, 50 mm | 1 | ||
| 07NAF-PT0010A | 2 | INSTALLER CUP | 1 | ||
| 07NAF-PT0020A | 2 | INSTALLER SHAFT | 1 | ||
| 07NAG-P13010A | 1 | TIMING BELT SLIDER | 1 | ||
| 07NAG-PT0010A | 2 | SEAL GUIDE | 1 | ||
| 07NAJ-P07010A | 2 | ADAPTER, PRESSURE GAUGE | 1 | ||
| 07PAD-0010000 | 2 | DRIVER, STEM SEAL | 1 | ||
| 07PAF-001A700 | 1 | INSERT PIN | 1 | ||
| 07RAB-TB4010B | 3 | FLANGE HOLDER | 1 | ||
| 07TGF-001000A | 1 | PISTON BASE HD/INSRT | 1 | ||
| 07TGG-001000A | 3 | GAUGE SET | 1 | ||
| 07VAD-P8A010A | 14 | SEAL DRIVER ATTACHMENT, 80 mm | 1 | ||
| 07VAJ-P8A010A | 2 | ADAPTER, AIR | 1 | ||
| 07VAJ-P8A020A | 2 | STOPPER, AIR | 1 | ||
| 07WAF-S84010A | 2 | INSTALLER SHAFT 10 mm | 1 | ||
| 07XAF-PT00100 | 2 | SEAL INSTALLER | 1 | ||
| 07ZAD-P8AA000 | 2 | EGR PORT TOOL SET | 1 | ||
| 07ZAD-PNAA100 | 14 | DRIVER, 96 mm | 1 | ||
| 07ZAJ-PNAA101 | 2 | VTEC AIR ADAPTER | 1 | ||
| 07ZAJ-PNAA200 | 2 | VTEC AIR STOPPER | 1 | ||
| 07ZAJ-PNAA300 | 2 | AIR JOINT ADAPTER | 1 | ||
| 07ZAJ-S5AA200 | 2 | OIL PRESSURE HOSE | 1 | ||
| 14540-P8A-A01 | 2 | TENSIONER STOPPER | 1 | ||
| 07AAJ-6MAA100 | 2 | SENSOR DEPTH GAUGE | 1 |
EV DRIVETRAIN
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 07-EL-51102-1 | 35 | HIGH VOLTAGE BATTERY LIFT BAR STRAP | 1 | ||
| 07-J-44215 | 35 | REAR MAIN SEAL INSTALLER | 1 | ||
| 07-J-33142 | 35 | AXLE SHAFT SEAL INSTALL | 1 | ||
| 07-DT-53202 | 35 | BEARING PRESS ADAPTER | 1 | ||
| 07-J-44412 | 35 | INSTALLER, PINION BEARING | 1 | ||
| 07-DT-53084-10 | 35 | STATOR HAIRPIN COVER (X76) | 1 | ||
| 07-J-45124 | 35 | KIT, BRIDGE | 1 | ||
| 07-DT-51919 | 35 | ADJUSTABLE PULLER | 1 | ||
| 07-CH-51034-A | 35 | CRADLE ALIGNMENT PINS | 1 | ||
| 07-DT-51592 | 35 | INSTALLER, FRONT OUTPUT SEAL | 1 | ||
| 07-J-22873 | 35 | MAINSHAFT BUSH INSTALLER | 1 | ||
| 07-GE-50389 | 35 | ADAPTER, QUICK CON. ASSY | 1 | ||
| 07-J-36857 | 35 | ENGINE LIFT BRACKET | 1 | ||
| 07-J-8092 | 36 | DRINER HANDLE | 1 | ||
| 07-J-45000 | 36 | UNIVERSAL SEAL REMOVER | 1 | ||
| 07-DT-53110 | 36 | TRANSFER GEAR HOLDING FIXTURE | 1 | ||
| 07-EN-52059 | 36 | ENGINE SUPPORT FIXTURE BOLTS | 1 | ||
| 07-DT-47784 | 36 | TRANS FLUID FILL PAN ADAPTER | 1 | ||
| 07-DT-53096 | 36 | OUTPUT SHAFT REMOVER | 1 | ||
| 07-DT-53204 | 36 | SEAL INSTALLER | 1 | ||
| 07-DT-49101 | 36 | MANUAL SHAFT SEAL INSTALLER | 1 | ||
| 07-DT-50710 | 36 | REMOVER, CASE/HSG BEARING CUP | 1 | ||
| 07-DT-50712 | 36 | REMOVER, CLUTCH HSG BEARING | 1 | ||
| 07-DT-53103 | 36 | TRANSFER GEAR BOLT SOCKET | 1 | ||
| 07-DT-53369 | 36 | OUTPUT SEAL INSTALLER | 1 | ||
| 07-DT-53381 | 36 | OUTPUT SHAFT SEAL PROTECTOR | 1 | ||
| 07-J-46625-10 | 36 | HOLDING FIXTURE ADAPTER | 1 | ||
| 07-J-36825-A | 36 | OUTPUT SHAFT OIL SEAL REMOVER | 1 | ||
| 07-DT-52017 | 36 | INSTALLER, VENT HOSE PIPE | 1 | ||
| 07-DT-47800-12 | 36 | HV BATTERY ALIGNMENT PINS | 1 | ||
| 07-J-6125-1B | 36 | SLIDE HAMMER | 1 | ||
| 07-DT-53205 | 36 | ALIGNMENT PINS MOTOR | 1 | ||
| 07-DT-53101 | 37 | DRIVE MOTOR ROTOR HOLD FIXTURE | 1 | ||
| 07-J-03289-20 | 37 | BASE & SCREW ASSEMBLY | 1 | ||
| 07-J-45859 | 37 | DRIVESHAFT AND HUB REMOVER | 1 | ||
| 07-CH-50732-A | 40 | STRUT NUT WRENCH, 18MM | 1 | ||
| 07-CH-50342 | 40 | THREADED ROD | 1 | ||
| 07-J-42188-B | 40 | BALL JOINT SEPARATOR | 1 | ||
| 07-CH-45400-100 | 40 | ADAPTER, STRUT SPRING COMPRESS | 1 | ||
| 07-J-45725-A-10 | 40 | BUSHING REPLACER | 1 | ||
| 07-J-46629-A | 37 | AXLE SEAL INSTALLER | 1 | ||
| 07-CH-28662 | 37 | BRAKE PEDAL GUAGE | 1 | ||
| 07-J-34296-1 | 35 | OIL SEAL PROTECTOR | 1 | ||
| 07-J-45124-9 | 35 | LEGS, PULLER BRIDGE | 1 |
FUEL/EMISSIONS TOOLS
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 070AA-TLA0100 | 17 | LOCK RING WRENCH | 1 | ||
| 070AG-AP3A100 | 4 | INJECTOR SEAL INSTALLER SET | 1 | ||
| 07AAF-T5RA100 | 4 | FUEL MOD SEPARATOR | 1 | ||
| 07ZAJ-RDJA110 | 5 | PIN PROBE MALE 2/PAC | 1 | ||
| 070AA-T0AA100 | 17 | FUEL NUT WRENCH | 1 | ||
| 070AG-5A0A100 | 5 | INJECTOR SEAL TOOL SET | 1 | ||
| 070AG-RPY0110 | 5 | SEAL GUIDE, 7.65 MM | 1 | ||
| 07406-004000C | 4 | FUEL PRESSURE GAUGE, 0-100 psi | 1 | ||
| 07406-004030A | 4 | ADAPTER FUEL PRESSURE | 1 | ||
| 07AAA-S0XA100 | 17 | FUEL SENDER WRENCH | 1 | ||
| 07AAA-SNAA101 | 17 | LOCKNUT WRENCH | 1 | ||
| 07AAA-TBAA100 | 17 | FUEL NUT WRENCH | 1 | ||
| 07AAF-TBAA100 | 5 | CAPLESS WRENCH | 1 | ||
| 07AAF-TBAA200 | 5 | RETAINER FLAP | 1 | ||
| 07AAF-TBAA300 | 5 | PICK | 1 | ||
| 07AAJ-E85A100 | 4 | GAS/ALCOHOL TESTER, E85 | 1 | ||
| 07AAJ-PAAA100 | 4 | ATTACH, FUEL GAUGE | 1 | ||
| 07AAJ-S6MA200 | 4 | PRESS GAUGE ADPTER B | 1 | ||
| 07AAJ-S6MA500 | 4 | PRESS GAUGE ADPTER C | 1 | ||
| 07AAJ-SEAA100 | 4 | PRESSURE GAUGE ADAPTER | 1 | ||
| 07AAJ-SEAA200 | 4 | PRESSURE GAUGE ADAPTER | 1 | ||
| 07AAJ-SNCA100 | 4 | PRESSURE GAUGE ADAPTER | 1 | ||
| 07AAJ-SNCA401 | 4 | PRESSURE GAUGE ADAPTER | 1 | ||
| 07AAK-TBAA100 | 5 | ORNR PLUG | 1 | ||
| 07AMJ-HW3A100 | 4 | F/PRESS MANFOLD HOSE | 1 | ||
| 07AMJ-HW3A200 | 4 | F/ADAPTER FEMALE | 1 | ||
| 07AMJ-HW3A300 | 4 | F/ADAPTER MALE | 1 | ||
| 07JAZ-001000B | 17 | GAUGE, 0-4 in. | 1 | ||
| 07NAC-SR20100 | 17 | FUEL SENDER WRENCH | 1 | ||
| 07PAZ-001010A | 5 | SCS SERVICE CONNECTOR | 1 | ||
| 07SAZ-001000A | 5 | BACKPROBE SET | 2 | ||
| 07TAZ-001020A | 5 | ADAPTER, 17 mm | 1 | ||
| 07TAZ-SZ3010A | 5 | IMMOBILIZER CONNECTOR | 1 | ||
| 07TAZ-SZ3020A | 5 | KEY TAG REMINDER | 1 | ||
| 07VAJ-004A100 | 4 | ADAPTER, FUEL GAUGE | 1 | ||
| 07WAZ-001010A | 5 | SERVICE CONNECTOR | 1 | ||
| 070AC-5A0A100 | 5 | INJECTOR SEAL PICKUP TOOL | 1 | ||
| 070AG-RPY0100 | 5 | INJECTOR SEAL TOOL | 1 | ||
| 07-J-41447-A | 5 | A/C TRACER DYE | 1 | ||
| 07-J-42220-A | 5 | 12V LEAK DETECTION LAMP | 1 | ||
| 07-GE-45268-130 | 5 | FITTINGS,1234YF FLUSHING KIT | 1 | ||
| 07-J-45268-121 | 5 | FLUSH ADAPTER KIT, TXV | 1 | ||
| 07-J-46246 | 5 | VALVE CORE TOOL | 1 |
HIGH VOLTAGE BATTERY
| 07-EL-53076-2 | 34 | BATTERY PACK COOLANT ADAPTER | 1 | |||
| 07-EL-53076-10 | 34 | BATTERY SYSTEM LEAK TEST CAPS | 1 | |||
| 07-GE-46143-A | 34 | ADAPTERS, BATTERY PRESSURE TEST | 1 | |||
| 07-EL-53097 | 34 | KIT, BOLT AND WASHER | 1 |
NGV TOOLS (FOR NGV DEALERS ONLY)
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 07AAA-S1GA100 | 23 | FILTER CAP WRENCH | 1 | ||
| 07AAJ-S1GA100 | 23 | CNGTANK MEASURING TOOL | 1 | ||
| 07AAZ-S5WA000 | 23 | CNG TANK VENTING KIT | 1 | ||
| 07HON-CNGKITA | Not stored in cabinet | CNG VALVE REPLACEMENT KIT | 1 | ||
| 07WAA-S1G0100 | 23 | PIN SPANNER 110 mm | 1 |
OVERSIZED TOOLS
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 07AAK-T20A101 | 102 | HUB WHEEL SUPPORT | 1 | ||
| 07AAK-5R7A100 | Not stored in cabinet | CARBON CLEANING KIT | 1 | ||
| 07AAK-SJCA100 | Not stored in cabinet | SUBFRAME FLUSH KIT | 1 | ||
| 07AAK-SJCA120 | Not stored in cabinet | ANTICORRSION WAX | 1 | ||
| 070AZ-SHJA190 | 102 | ISOFIX BUTTON KIT | 1 | ||
| 07AAF-000A150 | 102 | A/C COMPRESSOR KIT | 1 | ||
| 07JAZ-003000B | 102 | TERMINAL PIN KIT A | 1 | ||
| 07QAZ-003020C | 102 | TERMINAL PIN KIT C | 1 | ||
| 07YAC-PHM010C | 102 | IMA ROTOR PULLER | 1 | ||
| 07AAC-5AAA100 | 101 "Box Content K" | AC COMPRESSOR SEAL PULLER | 1 | ||
| 07AAG-5AAA101 | 101 "Box Content K" | AC COMPRESSOR SEAL GUIDE | 1 | ||
| 07AAE-5AAA101 | 101 "Box Content K" | AC COMPRESSOR SEAL DRIVER | 1 | ||
| 07AAD-5AAA101 | 101 "Box Content K" | 6CVC 1.5L SEAL PRESS | 1 | ||
| 07AAD-5BAA100 | 101 "Box Content K" | 6VCC 2.0L SEAL PRESS | 1 | ||
| 07-EL-52100 | 103 | MDI 2 WIFI VERSION | 1 | ||
| 07-J-39401-B | 103 | SIR DEPLOYMENT FIXTURE | 1 | ||
| 07-DT-53084 | 103 | ROTOR/STATOR REMOVE/INSTALL | 1 | ||
| 07-EL-48900-A | 103 | HEV SAFETY KIT | 1 | ||
| 07-J-45268 | 103 | FLUSH ADAPTER KIT, A/C | 1 | ||
| 07-J-45037 | 103 | A/C OIL INJECTOR | 1 | ||
| 07-EL-53000 | Not stored in cabinet | EV BATTERY SUPORT FIXTURE | 1 | ||
| 07-GE-47716 | Not stored in cabinet | NAC-N-FILL COOLANT REFILL TOOL | 1 | ||
| 07-EL-53080 | Not stored in cabinet | HN BATTERY LIFTING SYSTEM | 1 | ||
| 07-J-46625 | Not stored in cabinet | TRANS HOLDING FIXTURE | 1 | ||
| 07-DT-53198 | Not stored in cabinet | X77 LIFTING FIXTURE ADAPTER | 1 | ||
| 07AAK-KHZA100 | Not stored in cabinet | DUNNAGE, IPU SUPPORT | 1 | ||
| 07AAD-5J6A100 | 101 "Box Content K" | PRESS, 7CNC SEAL | 1 | ||
| 07-J-41416 | 103 | ULTRASONIC LEAK DETECTOR | 1 |
RADAR AND CAMERA TOOLS
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 070AK-SLEA110 | 101 | TARGET SHEET | 1 | ||
| 070AK-SLEA120 | 101 | MARK SHEET | 1 | ||
| 07AAA-TGVA100 | 101 | 3.5MM RADAR ADJUSTER | 1 | ||
| 07AAJ-T20A100 | 101 | M6X120 STANDOFF | 1 | ||
| 070AK-T2AA100 | 101 | TARGET STAND | 1 | ||
| 070AK-T2AA110 | 101 | TARGET SHEET | 1 | ||
| 070AK-TYPA0 3 0 | 101 | TARGET SET LKAS, 3 | 1 | ||
| 07AAB-TYPA020 | 101 | TARGET POLE SET LKAS | 1 | ||
| 07AAG-5R0A100 | 101 | CENTER ALIGNMENT | 1 | ||
| 07AAJ-STKA160 | 101 | TARGET SET | 1 | ||
| 07AAJ-STKA170 | 101 | ANGLE GAUGE | 1 | ||
| 07AAJ-STKA200 | 101 | REFLECTOR SET | 1 | ||
| 07AAJ-STKA210 | 101 | ALIGNMENT SET | 1 | ||
| 07AAJ-TK8A100 | 101 | STAND | 1 | ||
| 07AAJ-TK8A150 | 101 | RIM FRAME | 1 | ||
| 07AAK-5K0A100 | 101 | TARGET SET | 1 | ||
| 07AAK-5K0A110 | 101 | ATTACHMENT BRACKET | 1 | ||
| 07AAK-5K0A120 | 101 | STAND POLE | 1 | ||
| 07AAK-5K0A200 | 101 | REFLECTOR SET | 1 | ||
| 07AAK-TM0A100 | 101 | BSI EXTENSION PLATE | 1 | ||
| 07AAZ-T0AA100 | 101 | PROP BAR, HOOD | 1 |
STEERING TOOLS
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 07RAK-S040123 | 11 | P/S HOSE ADAPTER | 1 | ||
| 07VAK-P8A012C | 11 | P/S JOINT PLATE | 1 | ||
| 07406-001A101 | 11 | P/S PRESSURE GAUGE | 1 | ||
| 07725-0030000 | 11 | UNIVERSAL HOLD | 1 | ||
| 07AAA-STKA100 | 11 | RACK GUIDE WR, 43 mm | 1 | ||
| 07AAA-TL2A100 | 11 | RACK GUIDE WR, 40 mm | 1 | ||
| 07AAA-TL2A200 | 11 | LOCK NUT WRENCH | 1 | ||
| 07AAK-TK8A110 | 11 | P/S JOINT PLATE ADAPT | 1 | ||
| 07AAK-TK8A120 | 11 | P/S JOINT ADAPTER | 1 | ||
| 07RAK-S040110 | 11 | P/S JOINT ADAPTER PUMP | 1 | ||
| 07VAK-P8AA11B | 11 | P/S JOINT ADAPTER | 1 | ||
| 07XAA-002010A | 11 | WRENCH, STEER GEARBOX | 1 | ||
| 07ZAK-S7CA200 | 11 | JOINT ADAPTER, P/S | 1 | ||
| 07AAB-S5AA101 | 12 | PULLEY HOLDER | 1 | ||
| 07AAD-SAAA100 | 12 | DRIVER, 33.5 mm | 1 | ||
| 07AAJ-001A140 | 12 | STEERING DRIFT SET | 1 | ||
| 07-J-22610 | 11 | KIT, BOLT AND WASHER | 1 |
SUSPENSION/BRAKE TOOLS
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 070AD-TVAA100 | 16 | FRONT BRAKE CALIPER DUST BOOT INSTALLER | 1 | ||
| 07AAE-T20A200 | 15 | LOWER ARM RETAINER | 1 | ||
| 070AB-SJA0100 | 15 | HOLDER, BRAKE BOOSTER | 1 | ||
| 07914-SA50001 | 15 | SNAP RING PLIER | 1 | ||
| 07AAE-SEPA101 | 15 | CALIPER PISTON COMP | 1 | ||
| 07HAE-SG00100 | 15 | BRAKE SPRING COMPRES | 1 | ||
| 07JAG-SD40100 | 15 | GAUGE | 1 | ||
| 07LAF-SM40200 | 15 | INSTALLER, BRAKE SPRING | 1 | ||
| 070AD-TLA0100 | 16 | BRAKE PISTON SEAL INSTALLER | 1 | ||
| 070AD-TV0A100 | 16 | BRAKE DUST BOOT INSTALLER | 1 | ||
| 070AF-TA0A100 | 16 | BUSHING DRIVER | 1 | ||
| 070AF-TA0A220 | 16 | BUSHING RECEIVER SET | 1 | ||
| 070AF-TR0A100 | 16 | COMP BUSHING DRIVER | 1 | ||
| 070AF-TR0A200 | 16 | COMP BUSHING REC SET | 1 | ||
| 070AG-SJAA10S | 16 | SUBFRAME ALIGN PIN | 1 | ||
| 07AAA-SVAA100 | 16 | STRUT NUT ADAPTER | 1 | ||
| 07AAF-SDAA120 | 16 | DIS BASE, BALL JOINT | 1 | ||
| 07AAF-SEAA220 | 16 | BUSHING RECEIVER SET | 1 | ||
| 07AAF-SVAA200 | 16 | BUSHING RECEIVER SET | 1 | ||
| 07AAF-TL2A150 | 16 | BALL JOINT TOOL KIT | 1 | ||
| 07GAF-SD40200 | 16 | HUB DIS/ASSY TOOL | 1 | ||
| 071AF-S3NA000 | 24 | CAP, THREADED | 1 | ||
| 071AF-SZNA100 | 24 | BALL JOINT 14 mm | 1 | ||
| 07965-SA50500 | 24 | DIS TOOL E | 1 | ||
| 07974-SA50700 | 24 | CLIP GUIDE | 1 | ||
| 07AAC-SJCA120 | 24 | BALL JOINT SEPARATOR | 1 | ||
| 07AAE-SJAA100 | 24 | THREAD PROTECTOR | 1 | ||
| 07AAF-S5AA120 | 24 | BUSHING INSTALLER | 1 | ||
| 07AAF-SDAA100 | 24 | THREAD PROTECTOR 12 mm | 2 | ||
| 07AAF-SECA120 | 24 | THREAD PROTECTOR 10 mm | 1 | ||
| 07AAG-SNBA100 | 24 | GUIDE, ABS SENSOR (5PK) | 1 | ||
| 07AAJ-S5AA100 | 24 | BALLJOINT BORE GAUGE | 1 | ||
| 07AAK-SDAA100 | 24 | INSTALLER BASE 1 | 1 | ||
| 07GAF-SD4031A | 24 | BALL JOINT REMONR BASE C | 1 | ||
| 07PAF-0030100 | 16 | BALL JOINT INSTAL BASE | 1 | ||
| 07GAG-SD40700 | 24 | CLIP GUIDE | 1 | ||
| 07HAF-SF10120 | 24 | BALL JOINT INSTALLER BASE | 1 | ||
| 07HAF-SF1013A | 24 | BALL JOINT REMONR BASE F | 1 | ||
| 07JAF-SH20330 | 24 | BASE A BUSH | 1 | ||
| 07MAC-SL00102 | 24 | BALL JOINT REMOVER, 32 mm | 1 | ||
| 07MAC-SL00202 | 24 | BALL JOINT REMOVER, 28 mm | 1 | ||
| 07PAF-0030200 | 24 | INSTALLER | 1 | ||
| 07XAF-001010A | 24 | ADAPTER A, REMONER/INSTALLER | 1 | ||
| 07XAF-001020A | 24 | ADAPTER H, REMOVER/INSTALLER | 1 | ||
| 07XAF-001030A | 24 | ADAPTER B, INSTALLER | 1 | ||
| 07XAF-001040A | 24 | ADAPTER E, INSTALLER | 1 | ||
| 07XAF-001050B | 24 | ADAPTER (G) | 1 | ||
| 07965-SB00100 | 24 | BALL JOINT INSTALLER/REMOVER | 1 | ||
| 071AD-S3VA000 | 25 | BALL JOINT STRIKER T | 1 | ||
| 07965-6340100 | 25 | D/A TOOL PIN A | 1 | ||
| 07965-6920101 | 25 | D IS/ASSY TOOL | 1 | ||
| 07965-6920201 | 25 | DIS/ASSY HUB | 1 | ||
| 07965-SA70100 | 25 | FRT HUB TOOL A | 1 | ||
| 07AAB-SHJ-A120 | 25 | CAP HOLDER, MOD (2PK) | 1 | ||
| 07AAF-S5AA100 | 25 | COMPL BUSHING DRIVER | 1 | ||
| 07AAF-S5AA151 | 25 | BUSH REMOVER/INSTALL | 1 | ||
| 07AAF-SEAA100 | 25 | BUSHING DRIVER | 1 | ||
| 07AAJ-000A100 | 25 | OTC-7248 | 1 | ||
| 07GAF-SD40700 | 25 | HUB DIS/ASSY BASE | 1 | ||
| 07GAF-SD4A100 | 25 | HUB DIS/ASSY PIN | 1 | ||
| 07GAF-SE00100 | 25 | TOOL, HUB DIS/ASSY | 1 | ||
| 07GAF-SE00200 | 25 | BASE, HUB DIS/ASSY | 1 | ||
| 07GAF-SE00401 | 25 | FRONT HUB BASE | 1 | ||
| 07HAD-SF10100 | 25 | BEARING DRIVER ATTCH | 1 | ||
| 07-J-44894-A | 15 | BRAKE BLEEDER ADAPTER | 1 | ||
| 07-J-45101-100 | 16 | CONICAL BRAKE ROTOR WASHERS | 1 |
*Available from the Tool & Equipment Program
TRANSMISSION/CLUTCH TOOLS
| Inventory Y/N | BARCODE | TOOL NUMBER | DRAWER NUMBER | TOOL DESCRIPTION | QTY |
|---|---|---|---|---|---|
| 070AG-TZ3A100 | 9 | OIL SEAL GUIDE A | 1 | ||
| 07947-6890300 | 28 | C DRIVER ATTACHMENT | 1 | ||
| 070AB-5M5A100 | 10 | DETENT SHAFT SPLINE HOLDER | 1 | ||
| 070AD-5MXA100 | 9 | OIL SEAL DRIVER | 1 | ||
| 070AD-5MXA200 | 9 | OIL SEAL DRIVER | 1 | ||
| 070AD-TZ3A100 | 9 | OIL SEAL DRIVER | 1 | ||
| 070AD-TZ3A201 | 9 | OIL SEAL DRIVER B | 1 | ||
| 070AD-TZ3A300 | 9 | OIL SEAL DRIVER C | 1 | ||
| 070AD-TZ3A400 | 9 | OIL SEAL DRIVER D | 1 | ||
| 070AD-TZ3A500 | 9 | OIL SEAL DRIVER E | 1 | ||
| 070AG-TZ3A300 | 9 | OIL SEAL INSTALLER GUIDE C | 1 | ||
| 070AJ-002A101 | 21 | PRELOAD INSPECTION 30 | 1 | ||
| 07AAJ-52NA100 | 8 | FRAGMENT DETECTION | 5 | ||
| 070AB-SZT0100 | 6 | BOLT AND WASHER SET | 1 | ||
| 070AB-5S1A100 | 6 | HOLDER SET, RING GEAR | 1 | ||
| 070AD-PYZA100 | 6 | GEAR DRIVER, 57 x 62 mm | 1 | ||
| 07AAB-PGHA101 | 6 | CANON A75/A51 FIXTURE | 1 | ||
| 07AAB-PGHA110 | 6 | BRACKET A75/A510 | 1 | ||
| 07GAD-PG40100 | 6 | OIL SEAL DRIVER/DIFF | 1 | ||
| 07LAB-PV00100 | 6 | RING GEAR HOLDER | 1 | ||
| 07406-0020401 | 7 | GAUGE SET, PRESSURE | 1 | ||
| 07406-0070301 | 7 | GAUGE, LOW PRESSURE | 1 | ||
| 07AAJ-PY4A100 | 7 | AT PRESS TEST HOSE | 4 | ||
| 07MAJ-PY40120 | 7 | PRESSURE ADAPTER | 4 | ||
| 07AAC-STXA100 | 8 | AXLE SHAFT PULLER | 1 | ||
| 07AAD-S9VA000 | 8 | DRIVESHAFT REMOVER | 1 | ||
| 07AAD-SJAA100 | 8 | DRIVESHAFT REMOVER | 1 | ||
| 07AAD-STKA100 | 8 | DRIVER HANDLE | 1 | ||
| 07TAE-P4V0120 | 8 | START CLUTCH REMOVER | 1 | ||
| 07TAE-P4VA131 | 8 | START CLUTCH INSTALLER | 1 | ||
| 07XAC-001010A | 8 | THREAD ADAPTER 22 x 1.5 mm | 1 | ||
| 07XAC-001020A | 8 | THREAD ADAPTER 24 x 1.5 mm | 1 | ||
| 07946-MB00000 | 9 | DRIVER STEERING STEM | 1 | ||
| 07947-4630100 | 9 | DRIVER FORK SEAL | 1 | ||
| 07947-SD90101 | 9 | SEAL DRIVER ATTACHMENT | 1 | ||
| 07947-SD90200 | 9 | SEAL DRIVER ATTACHMENT | 1 | ||
| 07965-SD90100 | 9 | SUPPORT BASE | 1 | ||
| 07AAF-PCYA100 | 9 | OIL SEAL INSTALLER | 1 | ||
| 07AAF-S3VA101 | 9 | DUST SEAL DRIVER | 1 | ||
| 07GAB-PF50101 | 9 | MAINSHAFT HOLDER | 1 | ||
| 07JAD-PH80101 | 9 | DRIVER ATTACHMENT | 1 | ||
| 07AAE-P8EA000 | 10 | COMPRESSOR | 1 | ||
| 07AAE-P8EA220 | 10 | 3.5 CLUTCH ADAPT SET | 1 | ||
| 07AAF-P8EA000 | 10 | CLUTCH ALIGNMENT SHAFT | 1 | ||
| 07AAK-P8EA000 | 10 | ADAPTER | 1 | ||
| 07MAF-SP0013A | 10 | INSTALLER SHAFT | 1 | ||
| 07936-3710100 | 21 | REMOVER HANDLE | 1 | ||
| 07AAA-TZ3A100 | 21 | LOCK RELEASE | 1 | ||
| 070AA-R3P0100 | 21 | 17MM OFFSET SOCKET | 1 | ||
| 07AAB-PT0A100 | 21 | GEAR HOLDER | 1 | ||
| 07AAG-SNAA100 | 21 | CLUTCH ALIGNMENT SHAFT | 1 | ||
| 07AAJ-TR0A100 | 21 | BOOT HOLDER/GAUGE | 1 | ||
| 07GAJ-PG20110 | 21 | MAINSHAFT HOLDER | 1 | ||
| 07GAJ-PG20120 | 21 | COLLAR | 1 | ||
| 07GAJ-PG20130 | 21 | BASE, MAINSHAFT | 1 | ||
| 07HAJ-PK40201 | 21 | DIFFERENTIAL PRELOAD INSPECTION A/T | 1 | ||
| 07JAF-PM7011A | 21 | CLUTCH ALIGN. DISC | 1 | ||
| 07LAF-PT00110 | 21 | CLUTCH ALIGNMENT SHAFT | 1 | ||
| 07NAF-PR30100 | 21 | CLUTCH ALIGNMENT SHAFT | 1 | ||
| 07XAB-001A101 | 21 | FLANGE HOLDER | 1 | ||
| 07ZAF-PR8A100 | 21 | CLUTCH ALIGNMENT SHAFT | 1 | ||
| 070AJ-RT4A101 | 22 | 6AT PRESS GAUGE ADAPTR | 1 | ||
| 070AJ-RT4A170 | 22 | SWIVEL ATTATCHMENT | 1 | ||
| 07AAJ-PLYA100 | 22 | GAUGE, OIL PRESSURE | 1 | ||
| 07AAK-PGJA120 | Not stored in cabinet | PUMP, QUARTS | 1 | ||
| 07AAK-PGJA220 | Not stored in cabinet | PUMP, GALLONS | 1 | ||
| 07YAK-001010A | Not stored in cabinet | BATTERY LIFTER | 1 |
REQUIRED SPECIAL TOOLS AND EQUIPMENT
In accordance with the Automobile Sales and Service Agreement, Section 3.9, your service department is required to have, at a minimum, the tools and equipment listed in this bulletin.
When a new model is introduced and requires service tools, these tools may be shipped to you automatically. If you received a required service tool and believe you have an equivalent, refer to the Honda Service Operations Manual, Section 11, for the procedure to return items.
The tools and equipment in the following list can be purchased through the Honda Tool and Equipment Program or from outside sources. The recommended model listed for each item meets the minimum requirements for proper servicing of Honda vehicles. Refer to the Honda Tool and Equipment Program catalog or the Interactive Network (iN) electronic catalog (from the iN home page, click on Service , then under Quick Links , click Tool and Equipment Program ) for equipment details and for information on other models that may be more suitable for your servicing needs.
For additional questions, you can contact the program's customer service at 888-424-6857.
NOTE:
Items marked Auto-shipped would have been previously shipped to dealers.
AIR CONDITIONING SERVICE EQUIPMENT
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| A/C (R-134a) and (R-1234yf) Electronic Refrigerant Leak Detector | M eets NEW SAE J2913 standard for R-1234yf and previous SAE J2791 standard for R-134a. | RTI0268063500 | * | |
| A/C (R-134a) Refrigerant Recovery/Recharging Station | U.L. listed, complying to SAE J12210 (1991) standards, 4 cfm or larger vacuum pump, and measures the amount of refrigerant recovered by weight. incorporates thermistor vacuum gauge. | RTIACX2182H | * | |
| A/C (R-1234yf) Recover/Recycle/Recharge Machine | Designed and certified to SAE J2843 R-1234yf Recovery/Recycling/Recharging Equipment for Flammable Refrigerants for Mobile Air Conditioning Systems; Integrated refrigerant identifier (meets SAE J2927) Integrated thermistor vacuum gauge to achieve optimum evacuation for system charging and small leak detection; Integrate the vehicle VIN with service data via connection with the vehicle's Data Link Connector (DLC);Perform software/firmware updating via Wi-Fi; Generate an encrypted service code in the warranty data base for future use; On-board printer capable of printing vehicle service report slips to present to customers. | RTIACX2282 | * | |
| A/C Dye Leak Detection Kit | Optimax Jr™ A/C Leak Detection Kit (R-134a only) | TRP124893A | * | |
| A/C Dye Leak Detection Kit | A/C Leak Detection Kit (R-1234yf only) | TRP1234YFA | * |
Online Catalog: Log on to the Interactive Network (iN). Click on Service>Quick Links>Tool and Equipment Program.
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| Marksman II Ultrasonic Leak Detector | Detects leaks from orifices as small as 0.004" at 5.0 psi, from a distance of 12" | TRPT9367L | * | |
| Big Digit Hygro-Thermometer | Accurately measures temperature and humidity | PYR445703 | * | |
| Digital Pyrometer (Pocket Size) | Temperature range: -40°F to 230°F. Sensitivity: 0.1°. Accuracy: +/- 2%. Update rate: every 15 seconds. | TEMP2A | ||
| POE Oil Injector, R-1234yf | ROB18470 | * | ||
| PAG Oil Injector, R-134a | ROB18480 | * | ||
| POE Oil Injector, R-134a | ROB18490 | * |
AIR, LUBE, AND FUEL HANDLING EQUIPMENT
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| Oil Dispensing Unit | (See online catalog for options.) | |||
| Oil Filter Crusher | 10 ton capacity, fully air operated. | OTC1821 | ||
| Oil Deflector-Yellow | 1998-2002 Accord 4-cyl models. Designed to slip over flexible exhaust joint and deflect oil. | VSB02C000020 | * | |
| Oil Deflector - Light Green | 2023 Pilot | VSB02C000053 | * | |
| Oil Deflector-Blue (set of 2) | For Element and CR-V. Deflects oil drained during filter removal into an oil catch basin. | VSB02C000023 | * | |
| Oil Deflector-Gold (set of 2) | Comes with hose holder. For use with 2007 Civic Si. | VSB02C000033 | * | |
| Oil Deflector-Gold (set of 2) | For 1999-2009 Odyssey, 2003-2009 Pilot, and Ridgeline. Deflects oil drained during filter removal into an oil catch basin. | VSB02C000034 | * | |
| Oil Deflector-Purple | For 2011-later Odyssey, 2016-2012 Pilot, 2017-later Ridgeline | VSB02C0000052 | ||
| Portable Gasoline Defueler/Refueler | 30 gal: Meets all local/federal government safety and gasoline handling requirements. | TEMFM3000UL or TEMFM3200UL | ||
| Portable Waste Oil Receptacle | 25 gal capacity. | GRC238-866 | ||
| Oil Rag Waste Cans | Foot operated, promotes air circulation around can to disperse heat and prevent spontaneous combustion. Ranges from 6-21 gal. | HMH09100 or HMH09300 or HMH09500 or HMH09700 |
Online Catalog: Log on to the Interactive Network (iN). Click on Service>Quick Links>Tool and Equipment Program.
ALIGNMENT, WHEEL, AND BRAKE EQUIPMENT
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| FluidPRO BFX-20 Brake Fluid Exchanger | Includes: RTI025880060 Adapter BFX BA07 Universal Round, RTI025880070 Adapter, BFX BA08 Honda, RTI025880080 Adapter, BFX BA09 Honda, RT1025880240 Adapter, BFX BAHON1 Honda | RTIBFX20HPKG | ||
| Brake Bleeder, Diaphragm Type | BRNG300A | |||
| Tire and Wheel Run-Out Gauge | 6 to 15 in. range | CNT6456 | ||
| Honda 8-piece Brake Gauge Set | Capable of being used with brake pads/caliper installed | JSP97844 | * | |
| On-car Brake Lathe (Choose 1) | Hub centric adapters specific for Acura and Honda vehicles. | HUNACE11 or PCIX93ADPHON or PCIX15-3ADPHON | * | |
| Strut Spring Compressor | Min/Max spring diameters: 3.5/11.5 in. (9/23 cm) | BRN7600 | * | |
| Test Card for Magnetic Sensor Gears | The ATE Magnetic Test Card helps you avoid improperly installing wheel bearing replacements on vehicles equipped with Anti-Lock Braking System (ABS) sensors. | GLBATE760130 | * | |
| Throttle Depressor/Brake Pedal Jack | Maintains desired throttle position to hold engine RPM for A/C diagnostic procedures | B240B | * | |
| Tire Changer | Leverless tool head, non-rim-clamp design, capable of servicing 20 in. and larger high-performance and standard tires & wheels. | HUNTCA34R | ||
| Tire Pressure Gauge | 2 in. dial face, 0-100 psi | GHMRH100X | ||
| Tire Tread Depth Indicator | Measuring to a depth of 1 in. increments of 1/32 in. | TDG1 | ||
| TPMS Initiator and Reader | Reads and initiates TPMS sensors | AEQVT570000 | * | |
| TPMS Sensor Service Tool Set | Properly torques TPMS sensor valve stems during installation (Includes 11 mm deep socket) | CDIHONTPMS | * | |
| Master Wheel Lock Set-12 mm Exposed Wheel Locks | 10 key set for servicing all current vehicles using 12 mm wheel bolts | MCG047315 | * | |
| Master Wheel Lock Set-14 mm Exposed Wheel Locks | 10 key set for servicing all current vehicles using 14 mm wheel bolts | MCG047317 | * | |
| Wheel Alignment Rack (Choose 1) | Full four-wheel alignment capability, full-floating turning radius tables for the front and full-floating slip plates for the rear. | HUNRX10K or EELR587A (See online catalog for options.) |
Online Catalog: Log on to the Interactive Network (iN). Click on Service>Quick Links>Tool and Equipment Program.
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| Wheel Alignment System (Choose 1) | Full four-wheel alignment system. Cameras to have High Resolution with a minimum of 5 MP.
NOTE:
Hunter HE421 & HS421.
|
HUNWA673CMHN or EEWA552 (see online catalog for options) | ||
| Wheel Balancer Flange Plates/Pin & Collet Kit. | HUN2031031 | |||
| Wheel Balancer-Diagnostic | Reads in grams, 1-gram in-balance, measures road force. Used with Acura Flange Plates/Pins & Collets Kit. | HUNRFE33HON (See online catalog for options.) | ||
| 3M Polycut Roloc Brake Rotor Surfacing Discs 3", 120 Grit, Pack of 12 | 3" Disc, 120 Grit | PJB1411 | * | |
| 3M Roloc 3" Disc Pad Assembly | 3" Disc Pad Assembly | PJB5540 | * |
BODY ELECTRICAL EQUIPMENT
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| GPS Test Antenna with 20' Lead | Electronic devices, aftermarket accessories, and window tint films can sometimes cause antenna interference. Use this tool away from the vehicle to determine if something is blocking the antenna signal, or if the vehicle has a non-functional antenna part. | NUD420391A | * | |
| Tow Doctor™ Circuit Tester | Test all tow vehicle wiring functions | HOP50918 | * | |
| Trailer Hitch Wire Harness Tester | Test harnesses without having to connect a trailer. (4-pin and 5-pin) | TLT5 | ||
| Satellite Radio Test Antenna | 20 ft. Lead | NUD420392 | * |
ENGINE DIAGNOSTIC AND ELECTRICAL EQUIPMENT
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| Adaptive Cruise Control (ACC) Sensor Alignment Tool Set | Bubble gauge leveler to check and aim ACC sensor in correct angle for proper operation | HUN20-3788-1 | * | |
| Battery/Engine Coolant Tester | Measured based upon refractive index. | OTCJ23688 | ||
| Honda DCA-8000 Dynamic Diagnostic Charging System | Will charge, test, and print out a battery warranty diagnostic code. 1 for every 8 technicians. | MTRDCA8000PH | * | |
| Honda CPX-900 Battery and Electrical System Analyzer | CPX-900 Battery and Electrical System Analyzer. 1 for every 4 technicians. | MTRCPX900PBARH | * | |
| Clamp Meter, Low Current | Used to measure small amounts of current draw | FLULH41A | * | |
| Cooling System Adapter | 32 mm I.D. by 10 mm depth | ASTFZ13818 | ||
| Combination Laptop Lock | 4-digit code, 10000 user-settable combinations | CDW6377334 | ||
| Compression Gauge Adapter | 12 x 1.25 mm long reach | EEPV5G12L | ||
| Compression Gauge Set | Reaches hard-to-reach spark plug ports | EEPV500 | ||
| Computer Memory Saver | Portable, connects to the vehicle's data link connector (DLC). Maintains computer memory and presets while the battery is removed. | EZRMS4000H | * | |
| Cylinder Leak-Down Tester | Pressure gauge range is 0-100 psi (0-700 kPa). | EEPV509 | ||
| Digital Borescope | Video inspection scope for areas not easily accessible. | BK5600DUAL55 | * | |
| Digital Multimeter | Multimeter - minimum ranges: 1 millivolt to 400 volts DC 1 millivolt to 400 volts AC 0.1 ohm to 400 megaohms 0.1 milliamp to 10 amps, Diode testing capability, 0.5 Hz to 200 KHz frequency testing (optional) | FLU875/E2KIT | ||
| Chassis EAR | Electronic listening tool for finding squeaks and rattles. | JSPSM65001 or JSPSM06600 | ||
| Engine Oil Pressure Gauge Set | Displays from 0-100 psi (0-700 kPa) | EEPV507 | ||
| Integrated Power Unit (IPU) Handling Kit | OTCHON51102K | * | ||
| Oil Pressure Adapter Hose | This is used with part # MCM53475K21 Quick Disconnect Coupler | GSI6385AT77 | ||
| Vehicle Interface Cable | MongoosePro(R) Plus Honda Vehicle Interface Cable | DRWMGPHONA | ||
| Vehicle Service Maintenance Augmented Reality Tool | V-SMART 2.0 mobile application will validate and ensure proper vehicle repairs | CDW5994002PK | ||
| Vehicle Communications Interface (DST-i or MVCI) | 1 DST-i or MVCI required for every four technicians 2 DST-i or MVCI recommended for dealerships with seven or less technicians |
DSCWIFI | * | |
| Multimedia Interface Tester (MIT) | Diagnoses issues with Bluetooth functionality and audio jack connectivity. Does not require phone to test. | |||
| Oil Pressure Adapter | 1/8 in BSPT adapter | MCM53475K21 | ||
| Oxygen Sensor Socket, 22 mm | 1/2 in. drive, slot provided wire clearance. | S6176 | * | |
| Panasonic Toughbook or equivalent. Refer to iN requirements. | 1 laptop for every 2 technicians | FZ-55D2601KM | ||
| Portable Jump Starter | 1110 peak amps, 325 cranking | KKJ990056 | ||
| Propane Enrichment Device | For fuel system troubleshooting | OTC7148 | ||
| Radiator/Cooling System Pressure Tester | Pump with gauge (up to 30 psi) Includes standard neck and cap adapters. | SVTS272A | ||
| Radiator Adaptor w/Seal | 32 mm x 15 mm, silver (For use with SVTS262C tester) | SVT262-28A | ||
| Stethoscope | Equipped with sound-amplifying diaphragm and a 12 in. probe. | GA111D | * | |
| Timing Light | Advance capability 0 to 180° | EETL500 |
Online Catalog: Log on to the Interactive Network (iN). Click on Service>Quick Links>Tool and Equipment Program.
GENERAL SHOP EQUIPMENT
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| 22EPL TORX® Plus® with Countersink Socket | For removal and installation of rear control arm bolts | SLEPL220 | * | |
| TORX® Plus® 50IP Bit Socket Driver | For special low-profile head bolts found on the first and/or second row seat rails | FTX50TPE | * | |
| C-Frame Tool | U-Joint Removal Tool | OTC7248 | * | |
| Shop Vacuum (choose 1) | Wet/dry, heavy duty, 15 or 20 gallon | MNTC29085-05 or MNTC29085-06 | ||
| Air Hammer (Heavy Duty) | 3400 blows per minute, 4.6 lb. weight | AT2050 | ||
| Air Hose with Couplings | 30 ft. per stall | (See online catalog for options.) | ||
| A/T Cooler Cleaner | Portable, electrically-operated special tool that cleans the ATF cooler with high-pressure, heated ATF. (Spin-on filters available: GTHGNBP2) | GTHTTCF7AR | * | |
| ATF Leak Detection Kit | Used to diagnose automatic transmission fluid leaks. | UVUATFDYEKT | * | |
| Ball Joint/Disc Brake Dial Test Indicator Set | 1 in. dial indicator, 0 to 50 range, 0.0005 graduations, includes 12-1/2 in. flex arm with special locking pliers. | GA3634 | ||
| Bearing Separator | Capacity, 60 mm (0 to 2-3/8 in.) | CJ950 | ||
| Bearing Separator | Capacity, 117 mm (0 to 4-5/8 in.) | OTC1123 | ||
| Bearing Separator | Capacity, 146 mm (0 to 5-3/4 in.) | OTC1124 | ||
| Bench Grinder | 1/2 hp, 6 in. wheel diameter | WIL577101 | ||
| Bench Vise | 6-1/2 in. | WIL28807 | ||
| Bore Gauge | 10 to 18 mm | KD-3-5 | ||
| Bore Gauge | 18 to 35 mm | KD-3-6 | ||
| Bore Gauge | 35 to 80 mm | KD-3-1 | ||
| Bumper Saw (Reciprocating Saw, Air, High Speed) | Trailer hitch installation | AT192A | * | |
| EZ-Clone Honda Transponder Package | ILCEZCLONEH | |||
| Flex Hone | 89 mm diameter, 180 grit (3-1/2 in.) | BRMGB31218 | ||
| Flex Hone | 83 mm diameter, 180 grit (3-1/4 in.) | BRMGB31418 | ||
| Cylinder Hone | Rigid type, 100 mm capacity (4 in.) with 400 and 600 grit honing stones | (See online catalog for options.) | ||
| D70 Developer Spray (Case of 12) | Used to check for oil leaks from automatic transmissions (16 oz. cans) | M CED70 | * | |
| Deburring Tool | For deburring trunk spoiler mount holes. | DEBUR300 | * | |
| Dial Indicator | From 0 to 10 mm, in 0.001 mm increments | KK-14-6 | ||
| Digital Torque Angle Gauge | 0.1 degree resolution | ATECH3FR250B, CTECH3FR250A or JSP61404 | * | |
| Dial Indicator Magnetic Stand | With magnetic "on-off" switch control, capable of gripping flat or curved metal surfaces. | KK-13-1 | ||
| Drill | Hand-held variable speed, air or electric,1/2 in. | MLW1107-6 | ||
| Drill Bit Selection, SAE | 1/16 to 1/4 in. 29 bits | DBTR129 | ||
| Drill Bit Selection, Metric | 1 to 13 mm, 25 bits | DBM125C | ||
| Drop Down Glove Box Cover | Any vehicle equipped with a drop down style glove box (Quantity 2) | VSB02C000051 | * | |
| Bulldog Aviation Snips | Cuts through 16-gauge materials | MWT6716B | ||
| Exhaust System with Attachments. | In-Ground or overhead. | (See online catalog for options.) | ||
| Extractors, 3/8" | Hex, sockets, round, and others. | BET712 | * | |
| Flare Nut Wrenches (metric) | (4) sizes: 10, 12, 14, and 17 mm | RXSM10B RXSM12B RXSM14B RXSM17B | ||
| Hand Impact Driver | 3/8 in. drive 1/2 in. drive | PIT120 PIT160 | ||
| Handheld Vacuum Pump | Use to apply vacuum, up to -29.92 inhg, -101 kPa, -14.7 psi | YA4000B | ||
| Headlight Aimer | Meets SAE J-600 standard. | AMA82005 | ||
| Hole Saw Set | 16 mm, 19 mm, 22 mm, 24 mm, and 26 mm, Plastic carrying case. | AKS052507 | * | |
| Hot Plate (Griddle) | 12 x 21 in. Temp range 200 to 400°F. | |||
| Key Cutter Futura H/A, Futura PRO H/A, or GYMKANA | All will allow the user to cut the new stainless-steel key. | ILCD8A2839ZB, ILCD8A2858ZB, KYLGYMK994HO | * | |
| Master Rotabroach Hole Cutting Kit | For precision hole making in sheet metal and frame materials. Metric; 6-20 mm. Max materials thickness: 1/4 in. (6.4 mm). | BLR11201SO | * | |
| Micrometer | 0 to 25 mm, 0.01 mm increments | KK-1-1 or MSC06231633 | ||
| Micrometer | 25 to 50 mm, 0.01 mm increments | KK-1-2 or MSC06230973 | ||
| Micrometer | 50 to 75 mm, 0.01 mm increments | KK-1-3 or MSC06230999 | ||
| Paint Strainers (1000 per pkg.) | Used to identify contaminants in the ATF fluid drained from automatic transmission cores to be returned. | APT4583F | * | |
| Parts Washer, Electric | Recirculating type.
NOTE:
There is no EPA, OShA, state, or locally approved aqueous parts cleaner at this time.
|
PBC33C |
Online Catalog: Log on to the Interactive Network (iN). Click on Service>Quick Links>Tool and Equipment Program.
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| Piston Ring Compressor 73 mm | Tapered, hard anodized | SCP1473 | * | |
| Piston Ring Compressor 87 mm | Tapered, hard anodized | SCP1287 | * | |
| Piston Ring Compressor 89 mm | Tapered, hard anodized | SCP1289 | * | |
| Piston Ring Compressor, Adjustable | 2-band, Capacity, 100 mm (4 in.) | RC40C | ||
| Puller, Pitman Arm | Pressure screw 3/4 x 16 x 6-7/8 in. (175 mm) length. | CJ119B | ||
| Puller, Pilot Bearing | Attaches to slide hammer shafts with 3/4 in. -16 or 5/8 in. -18 threads | SP2031A | ||
| Puller, Harmonic Balancer | Pulls harmonic balancers, timing gears, and tapped holes. 1-1/2 in. to 4-5/8 in. (38-117 mm). | OTC518 | ||
| Puller, Steering Wheel | Bolt circle diameter ranges from 1 to 2-3/4 in. (26-70 mm). | OTC7403 | ||
| Puller, Two-Jaw | 1 Ton, 2-1/8 in. (54 mm) reach, 3-1/4 in. (82 mm) spread | KMTJ21834-4A | ||
| Puller, Two-Jaw | 2 Ton, 3-3/8 in. (86 mm) reach, 4-3/4 in. (120 mm) spread | OTCJ2288820A | ||
| Puller, Two-Jaw | 7 Ton, 5 in. (127 mm) reach 9 in. (228 mm) spread | OTC1035 | ||
| Ridge Reamer | Lathe type for 3-5 in. diameter cylinders. Self-centering | WR30A | ||
| Rivet Nut Tool | 8 mm for Ridgeline running boards | LEML722M8 | * | |
| Rivet Tool | Four mounted nosepieces (3/32", 1/8", 5/32", and 3/16") and service wrench. | MAR39000 | * | |
| Rubber Rollers | Used to roll down and seat accessory moldings | MHLE54D | * | |
| Serpentine Belt Tensioner | Works on most Honda serpentine belt tensioners | SCP10950 | ||
| Side jaw pincher pliers | To service newly designed low profile CV boot clamps found on 2013 models. | OET14100498 | * | |
| Slide Hammer, 5/8 x 18" Threaded | With 5-pound weight | KLS1155 | ||
| Slide Hammer, 5/8 x 18" Threaded | With 2-1/2-pound weight | KLS1156 | ||
| Small Hole Gauge Set | 4 piece set | MROUND4 | ||
| Socket | 34 mm Impact, 3/4 in. | IMM342 | ||
| Socket | 3/8" Drive SAE #12, Shallow Spline Socket | FES120B |
Online Catalog: Log on to the Interactive Network (iN). Click on Service>Quick Links>Tool and Equipment Program.
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| Socket | 36 mm Impact, 3/4 in. | IMM362 | ||
| Spring Scale | 1kg capacity, 20g graduation | SAMIN2MRP | ||
| Spring Scale | 6kg capacity, 50g graduation | SAMIN12MRP | ||
| Spring Scale | 12.5 kg capacity, 100g graduation | SAMIN25MRP | ||
| Time Clock | Commercially available | |||
| Torque Screwdriver | Adjustable, 5-40 in.-lbs | Qdriver4 | ||
| Torque Wrench | 1/4 in. drive, 5 to 250 N.m (44 to 221 in-lb) | QD1RN25B | ||
| Torque Wrench | 3/8 in. drive, 10 to 50 N.m (7 to 37 lb-ft) | QD2RN50A | ||
| Torque Wrench | 1/2 in. drive, 70 to 350 N.m (52 to 258 lb-ft) | QD 3RN350A | ||
| Trim Tool (10 piece) | Used to remove trim without damage (non-marring) | SILTRIMTL10 | * | |
| Trim Tools (All required) | 10 in. tool (7/32 in., 6 mm opening) 10 in. tool (3/8 in., 10 mm opening) 20 in. tool (7/32 in., 6 mm opening) 20 in. tool (3/8 in., 10 mm opening) | AS G185BR AS G186BR AS G190BR ASG187BR | * | |
| Trim Tool Set (4 piece) | KTC tools remove trim without damage (non-marring). | SOJATP2014 | * | |
| TORX Driver Set (10 piece) | 1/4 to 3/8 in. drive, T8, T10, T15, T20, T25, T27, T30, T40, T45, T50 | 210EFTXRY | ||
| TORX Socket | 3/8 in. drive, tamper resistant, E16 | FLE160A | ||
| TORX(R) Socket | External TORX(R) Socket, E8 | KDT80190 | ||
| TORX(R) Bit | T10 Long Stem | SDMT310A | ||
| U-Joint Removal Tool | Uses a forcing-screw press to safely remove and replace universal joints with needles bearings. | OTC7248 | * | |
| Ultrasonic Parts Washer | 4 Gallon Ultrasonic Cleaner 8 Gallon Ultrasonic Cleaner 45 Gal. Super Parts Washer. | KLS37-33465 KLS37-33474 OMEOMG5038 | ||
| Wheel Hub Polishing Kit, 14 pc | 1.5" and 2" Polishing Pads | JSP99471 | * |
Online Catalog: Log on to the Interactive Network (iN). Click on Service>Quick Links>Tool and Equipment Program.
HYBRID VEHICLE SPECIALTY EQUIPMENT
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| Insulated Gloves | Insulated gloves are important personal protection equipment when working on high voltage components. These Insulated Glove Sets include one pair each of Small, Medium, and Large, Class 0, Type 1 rubber insulated gloves and leather protectors. | Black Gloves SFGVGKN11B8 - Size 8 SFGVGKN11B9 - Size 9 SFGVGKN11B10 - Size 10 SFGVGKN11B11 - Size 11 Orange Gloves SFGVGKN11O8 - Size 8 SFGVGKN11O9 - Size 9 SFGVGKN11O10 - Size 10 SFGVGKN11O11 - Size 11 | * | |
| Insulated Tool Set (22 piece) | 1000V Certified | CTXCMXHONDAEVKIT | ||
| Protective Glove Bag | SFGVGB12 | * |
LIFTING EQUIPMENT
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| Automatic Transmission Case Dolly | Honda-designed dolly. Created specifically for the transport and handling of Honda automatic transmission cases (containers). | WCO210070 | ||
| Engine Balance Bar | 2008 V6 bar attachment | VSB02C000044 | ||
| Engine Balance Bar | 2003 Accord V6 | VSB02C000019 | * | |
| Engine Balance Bar | 2016 Pilot | VSB02C000041 | * | |
| Engine Hanger | For those models where a majority of the engine mounts must be removed, example the 1998 and later Accord (V6), 2001 Civic | AART1256 | * | |
| Engine Hanger Adapter | 2007 CR-V | SIL02C000032 | * | |
| Engine Hanger Adapter | 2003-2005 Civic Hybrid | VSB02BRSX0 | * | |
| Engine Hanger Adapter | 2003-2008 Pilot | VSB02C000014 | * | |
| Engine Hanger Adapter | 2.0/2.4 engines | VSB02C000015 | * | |
| Engine Hanger Adapter | 2002-2005 Civic Si | VSB02C000018 | * | |
| Engine Hanger Adapter | 2005 Odyssey | VSB02C000022 | * | |
| Engine Hanger Adapter | Ridgeline | VSB02C000024 | * | |
| Engine Hanger Adapter | 2006 Civic | VSB02C000025 | * | |
| Engine Hanger Adapter | 2007-2008 Fit | VSB02C000026 | * | |
| Engine Hanger Adapter | 1999-2004 Odyssey | VSB02C000028 | * | |
| Engine Hanger Adapter | 2001-2005 Civic | VSB02C000029 | * | |
| Engine Hanger Adapter | 2016 Pilot | VSB02C000031 | * | |
| Engine Hanger Adapter | 2016 Civic, Non-turbo | VSB02C000042 | * | |
| Engine Hanger Adapter | 2016 Civic, Turbo | VSB02C000043 | * | |
| Engine Hanger Adapter | 2007 CR-V | VSB02C000044 | * | |
| Engine Under Hoist Stand | 3/4 ton minimum (See catalog.) | NRI81034A or NRI81035A | ||
| Engine Stand | 1000 lb. capacity | NRI78100 | ||
| Engine Stand Transmission Adapter | Use with engine stand. | OTC7118 | ||
| Floor Crane (Choose 1) | 2200 lb. capacity foldable floor crane. | OTC1819 | ||
| 2500 lb. capacity foldable floor crane. | NRI78106A | |||
| Floor Jack | 2 ton low profile service jack | KLS359775 | * | |
| GoJak® Super Slick Jack | GoJak® Super Slick Jack model, qty. 4 and dolly required. | ZEN4520 (Qty. 4 reqd.) and ZENG567R Dolly Cart | ||
| Hydraulic Lift Truck | 750 lb. capacity, 22 in. deep by 30 in. wide. Platform or fork lift is capable of unloading and loading remanufactured automatic transmissions. | WCOPL54-2230 | * | |
| Coolant Flush Kit | Coolant Flush Kit Pump and Filter Set | VSB02C0000045 | ||
| 9AT Warmer Bucket | 9AT Warmer Bucket and Hose Set | VSB02C0000047 | ||
| 9AT Warmer Adapter | 9AT Warmer Adapter and Hardware Kit | VSB02C0000048 | ||
| 9AT Warmer Pressure Test | 9AT Warmer Pressure Test Kit | VSB02C0000046 | ||
| Vehicle Lifts | In-ground with 3-Staged or TRIO Arms. Recommend models equipped with leak detection system. or Above ground Two-post lift with 3-stage arms. | ROTSLW210U0G3E ROTSLW210U0G0E ROTSLW210IN0G0E CLFEW1020EV OR ROTSPOA10AV ROTSPOA10AVEH2 ROTSPOA10SWAVEH2 CLFCL10V32EV CLFCL10V32QCEV CLFCL10V3EV CLFCL10V3QCEV | ||
| Jack Stands (Pair) | 3-ton capacity, per pair | KLS6265743 | ||
| Lift Table | Lifting capacity - 1760 lbs. | KLS6227500 | * | |
| Lift Table Accessory Kit | Rubber blocks and mat. | OTCHON1001KT | ||
| Load Rotor® Positioning Sling | Use with Floor Crane for lifting. | OTC1805 | ||
| Magnetic Paint Thickness Gauge | A magnetic coating thickness gauge that measures the thickness of nonferrous coatings (paint, platings, plastics) on steel. | PRC2438 | * | |
| Subframe Adapter | 2003-2008 Pilot | VSB02BX0 | * | |
| Subframe Adapter | Universal, most models including 2003 Accord 4 Cyl | VSB02C000016 | ||
| Transmission Adapter, Universal | Bolts to the transmission and allows tipping with the transmission jack, when necessary. | VSB02C000012 | * | |
| Transmission Jack | 1/2 ton capacity, Two required. | NRI72550B |
Online Catalog: Log on to the Interactive Network (iN). Click on Service>Quick Links>Tool and Equipment Program.
WORK STALL EQUIPMENT
| Item | Minimum Specification and Notes | Recommended Model | Auto-shipped | |
|---|---|---|---|---|
| Flammables Storage Cabinet | Self-closing doors. Complies with local and federal government regulations. More than one cabinet may be needed, depending on quantity of chemicals to be stored. *Options 30, 45, 60 gallons. | HMH893020 or HMH894520 or HMH896020 | ||
| Roll Carts/Portable Tool Storage | (See online catalog for options) | |||
| Recycle Cabinets | Single cabinet | SHU791609 | ||
| Safety Station/Eye wash | Complies with local and state codes/OSHA. | (See online catalog for options) | ||
| Special Tool Storage and Inventory System | The Stanley Vidmar tool storage cabinet system with BARCODE scanner is the only special tool storage system supported by American Honda. | STNHONDA10 | * | |
| Tear-Down Bench | Assists in eliminating unsafe spills involved with working on transmissions, small engines and hydraulic systems. | SHU800023 | ||
| Workbenches/Workcenters | Minimum one per stall or one per technician. | (S ee online catalog for options) |
Online Catalog: Log on to the Interactive Network (iN). Click on Service>Quick Links>Tool and Equipment Program.