Removal & Installation

1. Fuel Fill Door Opener - Remove
2. Driver's Side B-Pillar Lower Trim - Remove - Refer to: Interior Trim Removal and Installation - Pillar Areas Interior Trim Removal and Installation - Tailgate Areas Interior Trim Removal and Installation - Cargo Areas Interior Trim Removal and Installation - Rear Side Area Interior Trim Removal and Installation - Door Areas
3. Left Rear Side Trim Panel - Remove - Refer to: Interior Trim Removal and Installation - Pillar Areas Interior Trim Removal and Installation - Tailgate Areas Interior Trim Removal and Installation - Cargo Areas Interior Trim Removal and Installation - Rear Side Area Interior Trim Removal and Installation - Door Areas
4. Both Rear Seat Cushion Assemblies - Remove
5. Floor Carpet - Remove
1. Detach the floor carpet as needed.
6. Fuel Fill Door Opener Cable - Remove

Courtesy of HONDA, U.S.A., INC.

1. Remove the cushion tape (A), and detach the fuel fill door opener cable (B) from the clips (C, D).

Courtesy of HONDA, U.S.A., INC.
2. Remove the fuel fill door opener cable (A).
7. All Removed Parts - Install

Courtesy of HONDA, U.S.A., INC.

1. Install the parts in the reverse order of removal.

NOTE: Align the marks (A) on the fuel fill door opener cable (B) with the cushion tape (C) and the clips (D) as shown.