Removal & Installation

1. Rear Door Wheel Arch Protector - Remove

Courtesy of HONDA, U.S.A., INC.

2. All Removed Parts - Install

Courtesy of HONDA, U.S.A., INC.

1. Install the parts in the reverse order of removal.

NOTE: If you are reusing the original rear door wheel arch protector (A), apply primer to the areas where new double-sided adhesive tapes (B, C, and D) will be applied, then attach new double-sided adhesive tapes to the rear door wheel arch protector as shown.

Adhesive tape (B):	Thickness 1.2 mm (0.047 in)
	Width 6 mm (0.24 in)
	Length 48 mm (1.89 in)
Adhesive tape (C):	Thickness 1 mm (0.04 in)
	Width 6 mm (0.24 in)
	Length 18 mm (0.71 in)
Adhesive tape (D):	Thickness 1.2 mm (0.047 in)
	Width 6 mm (0.24 in)
	Length 18 mm (0.71 in)