Test Procedure

1. Tailgate Lower Trim Panel - Remove - Refer to: Interior Trim Removal and Installation - Pillar Areas Interior Trim Removal and Installation - Tailgate Areas Interior Trim Removal and Installation - Cargo Areas Interior Trim Removal and Installation - Rear Side Area Interior Trim Removal and Installation - Door Areas
2. Tailgate Outer Handle Switch - Test

Courtesy of HONDA, U.S.A., INC.

Courtesy of HONDA, U.S.A., INC.

1. Disconnect the tailgate outer handle switch connector.

2. Check for continuity between the terminals in each switch position according to the table.

3. If the continuity is not as specified, replace the tailgate outer handle switch (A).

4. Connect the tailgate outer handle switch connector.
3. All Removed Parts - Install - Install the parts in the reverse order of removal.