Wiper Motor Removal & Installation: Removal

Windshield 

• 1. Center Cowl Cover - Remove 
• 2. Under-Cowl Panel - Remove
• 3. Linkage Assembly - Remove

  Courtesy of HONDA, U.S.A., INC.

• 4. Windshield Wiper Motor - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Note the alignment marks (A) on the link (B) and the linkage (C), then remove the link

  2. Remove the connection rod (D) from the link

  3. Disconnect the connector (E), then remove the windshield wiper motor subharness

  4. Remove the wiper motor (F) from the linkage.

  Rear Window 

• 1. Tailgate Lower Trim Panel - Remove - Refer to: Interior Trim Removal and Installation - Pillar AreasInterior Trim Removal and Installation - Tailgate AreasInterior Trim Removal and Installation - Cargo AreasInterior Trim Removal and Installation - Rear Side AreaInterior Trim Removal and Installation - Door Areas
• 2. Rear Window Wiper Arm Assembly - Remove 
• 3. Rear Window Wiper Motor - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Remove the cap (A), the mounting nut (B), and the washer (C).

  Courtesy of HONDA, U.S.A., INC.

  2. Disconnect the connector 3. Remove the rear window wiper motor (A).