Power Lumbar Support Switch Test: Test

1. Front Seat Belt Lower Anchor Bolt - Remove (Without Front Driver's Lap Belt Tensioner)
2. Front Seat Recline Cover - Remove
NOTE: If you are removing the seat recline cover, you do not need to remove the front seat.
3. Lumbar Support Switch - Test

Courtesy of HONDA, U.S.A., INC.

Courtesy of HONDA, U.S.A., INC.

1. Check for continuity between the terminals in each switch position according to table.

2. If the continuity is not as specified, replace the lumbar support switch (A) .
4. All Removed Parts - Install the parts in the reverse order of removal.