Brake System Inspection & Test: Inspection
- 1. Brake System - Inspect
Inspect the brake system components listed. Repair or replace any parts that are leaking or damaged.
Component Inspections:
Component Procedure Also check for Master Cylinder Look for damage or signs of fluid leakage at: - Reservoir tank or master cylinder body.
- Lines, reservoir tank hose and grommets, and their joints.
- Between master cylinder and booster.
Bulging seal at reservoir cap. This is a sign of fluid contamination. Brake Hoses Look for damage or signs of fluid leakage at: - Line joints and banjo bolt connections.
- Hoses and lines, also inspect for twisting or damage.
Bulging, twisted, or bent lines. Caliper Look for damage or signs of fluid leakage at: - Piston seal.
- Banjo bolt connections.
- Bleed screw.
Seized or sticking caliper pins. VSA Modulator-Control Unit Look for damage or signs of fluid leakage at: - Line joints.
- Modulator-control unit.