Parking Brake Shoe Lining Break-in: Break-in
- 1. Parking Brake Shoe Lining - Break-in
Do this operation in a safe area.
NOTE:
- Do the brake lining surface break-in when replacing shoes with new brake linings and/or new rear brake disc/drum.
- Check the number of parking brake pedal clicks. Adjust the parking brake before lining surface break-in .
1. Park the vehicle on a firm, level surface
2. Release the parking brake pedal
3. Press the parking brake pedal 4 clicks
4. Drive the vehicle for 0.25 mile (400 m) at about 31 mph (50 km/h)
5. Stop the vehicle, and release the parking brake for 5-10 minutes to allow the brake disc/drum to cool
6. Repeat steps 3 through 5 two more times
7. Do the parking brake adjustment.
