Removal & Installation

1. 12 Volt Battery Terminal - Disconnect
2. Exhaust Pipe A - Remove
3. Intake Manifold Bracket - Remove

Fig 1: Intake Manifold Bracket With Torque Specifications
Courtesy of HONDA, U.S.A., INC.
4. Positive Starter Cable and Connector - Disconnect

Courtesy of HONDA, U.S.A., INC.

1. Remove the harness clamp (A)

2. Disconnect the positive cable (B) and the connector (C).
5. Starter - Remove

Fig 2: Starter With Torque Specifications
Courtesy of HONDA, U.S.A., INC.
6. All Removed Parts - Install the parts in the reverse order of removal.
NOTE: Make sure the crimped side of the ring terminal faces away from the starter when you connect the positive starter cable.