Transmission End Crankshaft Oil Seal Replacement - In Car: Replacement

1. Drive Plate Assembly - Remove
2. Transmission End Crankshaft Oil Seal - Remove

Courtesy of HONDA, U.S.A., INC.

3. Transmission End Crankshaft Oil Seal - Install

Courtesy of HONDA, U.S.A., INC.

1. Clean and dry the transmission end crankshaft oil seal housing

2. Apply a light coat of new engine oil to the lip of the transmission end crankshaft oil seal

3. Using the driver handle, 15 x 135L and the oil seal driver attachment, 96 mm, to drive a new transmission end crankshaft oil seal (A) squarely into the engine block to the specified installed height.

Courtesy of HONDA, U.S.A., INC.

4. Measure the distance between the engine block (A) and the transmission end crankshaft oil seal (B).

Oil Seal Installed Height:

0.2-1.2 mm (0.008-0.047 in)

4. All Removed Parts - Install the parts in the reverse order of removal.