Removal & Installation

1. Ignition Coil and Spark Plug - Remove

Fig 1: Ignition Coil & Spark Plug With Torque Specifications
Courtesy of HONDA, U.S.A., INC.

1. Remove the ignition coil cover (A)

2. Disconnect the connectors (B)

3. Remove the ignition coils (C)

4. Remove the spark plugs (D).
2. All Removed Parts - Install the parts in the reverse order of removal.
NOTE: When the spark plugs installing, apply a small amount of anti-seize compound to the spark plug threads, and screw the spark plugs into the cylinder head, finger-tight, then tighten the spark plugs to the specified torque.
3. Maintenance Minder - Reset (With Maintenance Minder System)
1. If the Maintenance Minder required to replace the spark plugs, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder").