Removal & Installation

1. Power Mirror - Remove
2. Mirror Housing Cover - Remove

3. Lower LaneWatch Housing - Remove

GHH51507

Courtesy of HONDA, U.S.A., INC.

1. Remove the cover (A), then remove the screws.

GHH51508

Courtesy of HONDA, U.S.A., INC.

2. Remove the lower LaneWatch housing.

NOTE: Some models use two screws.

4. Side Turn Signal Light - Remove (For Some Models)
5. LaneWatch Camera - Remove

Courtesy of HONDA, U.S.A., INC.

1. Disconnect the connector (A)

2. Remove the TORX screws, then remove the LaneWatch camera (B).
6. All Removed Parts - Install
7. LaneWatch Camera - Aim