Rear Differential Mount Removal & Installation(AWD): Removal

1. Vehicle - Lift
2. No. 2 Propeller Shaft - Disconnect
3. Rear Differential - Jack Support
1. Place a transmission jack under the rear differential assembly.
4. Rear Differential Mount Bracket - Remove

Courtesy of HONDA, U.S.A., INC.

1. Remove the left and right rear differential mount brackets B.
5. Rear Differential Mount Rubber - Remove

Courtesy of HONDA, U.S.A., INC.

1. Remove the rear differential mount rubber (A).

6. Rear Differential Mount Assembly A - Remove

Courtesy of HONDA, U.S.A., INC.

1. Remove the mounting bolts (A) and the plates (B).

Courtesy of HONDA, U.S.A., INC.

2. Slightly lower the rear differential on the transmission jack.

NOTE: Make sure you do not over extend the breather hose.

3. Remove the rear differential mount assembly A stopper (B)

4. Remove the rear differential mount assembly A.