Resetting Individual Maintenance Item

1. Connect the Honda Diagnostic System (HDS) to the data link connector (DLC) .

2. Turn the vehicle to the ON mode.

3. Make sure the HDS communicates with the vehicle and the powertrain control module (PCM). If it does not communicate, troubleshoot the DLC circuit .

4. Select GAUGES in the BODY ELECTRICAL with the HDS.

5. Select ADJUSTMENT in the GAUGES with the HDS.

6. Select MAINTENANCE INFORMATION in the ADJUSTMENT with the HDS.

7. Select MAINTENANCE MINDER in the MAINTENANCE INFORMATION with the HDS.

8. Select the individual maintenance item you wish to reset with the HDS.