Removal & Installation

1. Both Windshield Wiper Arms - Remove
2. Both Cowl Top Covers - Remove

Courtesy of HONDA, U.S.A., INC.

NOTE: Repeat this procedure on the opposite side.
3. Both Front Fender Trims - Remove
4. Both Side Cowl Covers - Remove

Courtesy of HONDA, U.S.A., INC.

NOTE: Repeat this procedure on the opposite side.

1. Detach the hook (A) at the inside of the cowl cover (B)

2. Detach the hooks (C), then remove the side cowl cover (D)

3. Right side: Detach the windshield washer tube.
5. Center Cowl Cover - Remove

Courtesy of HONDA, U.S.A., INC.
6. Rear Hood Seal - Remove

Courtesy of HONDA, U.S.A., INC.

1. If necessary, remove the rear hood seal (A).
7. All Removed Parts - Install the parts in the reverse order of removal.