Side Sill Panel Removal & Installation: Removal

Courtesy of HONDA, U.S.A., INC.

1. Remove the screws (A) and the clips (B)

2. Detach the clips (C, D) with the trim tool, then detach the front wheel arch protector (E) rear side as needed.

Courtesy of HONDA, U.S.A., INC.

3. Put a shop towel (A) in the opening between the front wheel arch protector and the front fender.

Courtesy of HONDA, U.S.A., INC.

1. Remove the screws (A) and the clip (B)

2. Detach the clips (C, D) with the trim tool, then detach the rear wheel arch protector (E) front side as needed.

Courtesy of HONDA, U.S.A., INC.

3. Put a shop towel (A) in the opening between the rear wheel arch protector and the rear fender.

Courtesy of HONDA, U.S.A., INC.

1. Remove the clips (A) and the screws (B)

2. Slide the side sill panel (C) forward and remove it.

NOTE:  The clips (D) will stay in the body

3. Remove the clips by turning them 45°

4. Install the clips on the side sill panel.