DTC 32-0F: Battery Current/Motor Current Correlation
NOTE: Before you troubleshoot, review the general troubleshooting information .
| DTC Description | DTC | Freeze Frame |
|---|---|---|
| 32-0F Battery Current/Motor Current Correlation |
- 1. Problem verification:
1. Turn the vehicle to the ON mode.
2. Clear the DTC with the HDS.
3. Turn the vehicle to the OFF (LOCK) mode, then start the engine.
4. Turn the steering wheel from lock to lock at least 5 times.
5. Check for DTCs with the HDS.
DTC Description DTC Freeze Frame 32-0F Battery Current/Motor Current Correlation Is DTC 32-0F indicated?
YES
The failure is duplicated. Go to step 2.
NO
Intermittent failure, the system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.
- 2. EPS control unit check (update):
1. Update the EPS control unit if it does not have the latest software.
2. Clear the DTC with the HDS.
3. Turn the vehicle to the OFF (LOCK) mode, then start the engine.
4. Turn the steering wheel from lock to lock at least 5 times.
5. Check for DTCs with the HDS.
DTC Description DTC Freeze Frame 32-0F Battery Current/Motor Current Correlation Is DTC 32-0F indicated?
YES
Replace the EPS control unit .
NO
Troubleshooting is complete.