Wheel Speed Sensor Removal & Installation: Installation

NOTE: 

• Install the sensor carefully to avoid twisting the wires.
• If the wheel speed sensor comes in contact with the hub bearing unit, it is faulty.
• Make sure there is no debris in the sensor mounting hole.

Front 

• 1. Front Wheel Speed Sensor - Install

  Courtesy of HONDA, U.S.A., INC.

  1. Install the wheel speed sensor (A).

  2. Install the harness clips (B)

  3. Connect the connector (C)

  4. Connect the connector holding clamps (D).

• 2. Front Wheel - Install

  Rear 

• 1. Rear Wheel Speed Sensor - Install

  Courtesy of HONDA, U.S.A., INC.

  1. Install the wheel speed sensor (A).

  2. Install the harness clips (B)

  3. Connect the connector (C)

  4. Connect the connector holding clamps (D).

• 2. Rear Wheel - Install