Brake Hose Removal & Installation: Installation

Courtesy of HONDA, U.S.A., INC.

Do not spill brake fluid on the vehicle; it may damage the paint. If brake fluid gets on the paint, wash it off immediately with water.

Front 

• 1. Front Brake Hose - Install
  Fig 1: Front Brake Hose With Torque Specifications

  Courtesy of HONDA, U.S.A., INC.

  NOTE: 

  • Check that all parts are free of dirt and other foreign particles.
  • Replace parts with new ones whenever specified to do so.

  1. Install the brake hose (A) with the mounting bolt (B)

  2. Connect the brake hose to the caliper body with the banjo bolt (C) and new sealing washers (D).

  Fig 2: Brake Hose With Torque Specifications

  Courtesy of HONDA, U.S.A., INC.

  3. Connect the brake line (A) to the brake hose (B)

  4. Install a new brake hose clip (C).

• 2. Brake System - Bleed
• 3. Brake Hose and Line - Check

  NOTE: 

  • Check for leaks at hose and line joints or connections, and retighten if necessary.
  • Check the brake hoses for interference and twisting.
• 4. Front Wheel - Install

  Rear 

• 1. Rear Brake Hose - Install
  Fig 3: Rear Brake Hose With Torque Specifications

  Courtesy of HONDA, U.S.A., INC.

  NOTE: 

  • Check that all parts are free of dirt and other foreign particles.
  • Replace parts with new ones whenever specified to do so.

  1. Install the brake hose (A) with the brake hose mounting bolt (B)

  2. Connect the brake hose to the caliper body with the banjo bolt (C) and new sealing washers (D).

  Fig 4: Brake Hose & Brake Line With Torque Specifications

  Courtesy of HONDA, U.S.A., INC.

  3. Connect the brake line (A) to the brake hose (B)

  4. Install a new brake hose clip (C).

• 2. Brake System - Bleed
• 3. Brake Hose and Line - Check

  NOTE: 

  • Check for leaks at hose and line joints or connections, and retighten if necessary.
  • Check the brake hoses for interference and twisting.
• 4. Rear Wheel - Install