Rear Brake Pad Inspection: Inspection

Courtesy of HONDA, U.S.A., INC.

Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health.

• Avoid breathing dust particles.
• Never use an air hose or brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner.

• 1. Vehicle - Lift
• 2. Rear Wheels - Remove
• 3. Brake Pad - Inspect

  Courtesy of HONDA, U.S.A., INC.

  1. Check the thickness (A) of the inner pad (B) and the outer pad (C). Do not include the thickness of the backing plate.

  Brake pad thickness:
  	Standard:	9.0 mm (0.354 in)
  	Service limit:	1.6 mm (0.063 in)

  2. If any part of the brake pad thickness is less than the service limit, replace the brake pads as a set.

• 4. Rear Wheels - Install