Rear Seat Armrest Removal and Installation: Replacement

1. Rear Seat Armrest - Remove

Courtesy of HONDA, U.S.A., INC.

1. Remove the armrest side cover (A)

2. Remove the bolt (B) with a 5 mm hex wrench.

Courtesy of HONDA, U.S.A., INC.

3. Slide the armrest (A) toward the left side

4. Remove the right pivot shaft (B) from the friction plate (C).

Courtesy of HONDA, U.S.A., INC.

5. Slide the armrest (A) toward the right side

6. Release the left pivot shaft (B) from the collar (C)

7. Pull up the armrest, then pull out the armrest shaft (D) from the rear seat-back frame (E), then remove the armrest.

Courtesy of HONDA, U.S.A., INC.

8. Remove the collar (A), the inner friction plate (B), and the outer friction plate (C) from the rear seat-back frame.

2. All Removed Parts - Install - Install the parts in the reverse order of removal.