Rear Seat-Back Frame Removal and Installation: Replacement

Fig 1: Rear Seat-Back Latch With Torque Specifications

Courtesy of HONDA, U.S.A., INC.

1. Detach the rear seat-back lock knob control cable (A) and the rear seat-back lock control cable (B) from the cable bracket (C)

2. Disconnect the rear seat-back lock knob control cable and the rear seat-back lock control cable from the rear seat-back latch (D)

3. Remove the bolts (E), then remove the rear seat-back latch.

Fig 2: Rear Seat-Back Outer Pivot With Torque Specifications

Courtesy of HONDA, U.S.A., INC.

1. Remove the bolts (A, B), then remove the rear seat-back outer pivot (C).

Courtesy of HONDA, U.S.A., INC.

2. Remove the rear seat-back inner trim (A) 3. Remove the rear seat head restraint protector (B).

Courtesy of HONDA, U.S.A., INC.

4. Left side: Remove the rear seat-back outer cover (A).

Courtesy of HONDA, U.S.A., INC.

5. Remove the rear seat-back lower cover (A) 6. Remove the rear seat-back inner cover (C).

Courtesy of HONDA, U.S.A., INC.

7. Remove the rear seat-back lower cover (A) 8. Remove the rear seat-back cancel cover (B).

Fig 3: Rear Seat Head Restraint Frame With Torque Specifications

Courtesy of HONDA, U.S.A., INC.

Courtesy of HONDA, U.S.A., INC.

12. Remove the wire tie (A).

Fig 4: Rear Seat-Back Arrange Unit With Torque Specifications

Courtesy of HONDA, U.S.A., INC.

Courtesy of HONDA, U.S.A., INC.

16. Disconnect the rear seat-back head restraint control cable (A), the rear seat-back lock control cable (B), the rear seat-back cancel control cable (C), and the rear seat-back arrange control cable (D).

Courtesy of HONDA, U.S.A., INC.

17. Right rear seat-back: Remove the rear seat-back damper (A) from the rear seat-back frame (B).