A/T gear position indicator does not indicate shift lever positions

Probable cause(s)

• PCM defective
• Transmission range switch defective or out of adjustment
• Shift cable broken or out of adjustment
• Control pin broken
• Control shaft assembly worn or damaged

Notes

• Check for a stored DTC - Refer to: How to Troubleshoot the Fuel and Emissions SystemsHow to Troubleshoot the CVT System(CVT System)  , and check for loose connectors.
• Inspect the transmission range switch .
• Check for a loose shift cable at the shift lever and the transmission control lever .
• Check the control shaft assembly for wear and damage. If the control shaft assembly is worn or damaged, replace it as an assembly.