Shift lever cannot be moved from P while pressing on the brake pedal

Probable cause(s)

• Shift lock solenoid defective
• Shift lock solenoid control circuit
• Shift lock mechanism defective
• Brake pedal position switch circuit
• Brake pedal position switch defective
• Accelerator pedal position sensor circuit
• Accelerator pedal position sensor defective
• Transmission range switch ATP-P switch stuck OFF
• Transmission range switch ATP-P switch line opened
• Relative throttle position sensor value too high
• Throttle body defective

Notes

• Troubleshoot the shift lock system circuit .
• Test the shift lock solenoid .
• Inspect the transmission range switch .
• Inspect the APP sensor signal .
• Reset the PCM .