Stall speed low

Probable cause(s)

• PCM defective
• Engine output low
• Transmission fluid feed pipe worn, damaged, or out of round
• Main valve body defective
• Secondary valve body defective
• Linear solenoid valve body defective
• Clutch reducing valve body defective
• Stator shaft worn or damaged
• Torque converter assembly defective
• Torque converter ring gear worn or damaged
• Transmission assembly and drive plate installation defective

Notes

• Check for a stored DTC - Refer to: How to Troubleshoot the Fuel and Emissions SystemsHow to Troubleshoot the CVT System(CVT System)  , and check for loose connectors.
• Check the transmission fluid feed pipe for wear, damage, and out of round.
• Check the main valve body for wear and damage.
• Check the secondary valve body for wear and damage.
• Check the linear solenoid valve body for wear and damage.
• Check the clutch reducing valve body for wear and damage.
• Check the stator shaft for wear and damage.
• Inspect the torque converter assembly for wear and damage. If the torque converter assembly is worn or damaged, replace it as an assembly .