Headlight Removal & Installation: Removal

Courtesy of HONDA, U.S.A., INC.

1. Remove the headlight (A) with the corner upper beam (B) as an assembly

2. Remove the harness clips (C) from the headlight housing

3. Disconnect these connectors:

• Headlight (low beam) connector
• Headlight (high beam)/Daytime running light connector^*1
• Headlight (high beam) connector^*2
• Daytime running light/Front parking light (LED) connector^*2
• Front parking light/Front side marker light connector^*1
• Front side marker light^*2
• Front turn signal light connector

*1: Without LED Daytime Running Light

*2: With LED Daytime Running Light

Courtesy of HONDA, U.S.A., INC.

4. Remove the bolt, and release the pin (A) from the corner upper beam (B) 5. Release the pins (C) from the corner upper beam, then remove the corner upper beam from the headlight (D).