Headlight Removal & Installation: Installation

• 1. Headlight - Install

  Courtesy of HONDA, U.S.A., INC.

  1. Install the corner upper beam (A) to the pin (B) of the headlight (C)

  2. Install the corner upper beam to the pins (D)

  3. Install the corner upper beam to the pin (E), then install the bolt.

  Courtesy of HONDA, U.S.A., INC.

4. Connect these connectors:

• Headlight (low beam) connector
• Headlight (high beam)/Daytime running light connector^*1
• Headlight (high beam) connector^*2
• Daytime running light/Front parking light (LED) connector^*2
• Front parking light/Front side marker light connector^*1
• Front side marker light^*2
• Front turn signal light connector

• *1: Without LED Daytime Running Light
• *2: With LED Daytime Running Light
• 5. Install the harness clips (A) to the headlight housing
• 6. Install the headlight (B) with the corner upper beam (C) as an assembly.

• 2. Front Bumper - Install
• 3. Headlight - Adjustment