Test Procedure

1. Audio-Navigation Unit - Remove (With Audio-Navigation Unit)
2. Audio Unit - Remove (Without Audio-Navigation Unit) - Refer to: Audio Unit Removal and Installation (With Display Audio)Audio Unit Removal and Installation (With Normal Audio)
3. Hazard Warning Switch - Test

Courtesy of HONDA, U.S.A., INC.

Courtesy of HONDA, U.S.A., INC.

1. Check for continuity between the terminals in each switch position according to the table.

2. If the continuity is not as specified, replace the bulb(s).

3. If the continuity is still not as specified, replace the hazard warning switch (A) .
4. All Removed Parts - Install - Install the parts in the reverse order of removal.