DTC 1002: SD Read Error

NOTE: 

• Check the vehicle 12 volt battery condition first .
• This audio DTC sets when there is a problem with the SD card module.
• Before you troubleshoot, make sure to follow the General Troubleshooting Information - Refer to: How to Troubleshoot the Audio SystemAudio System Self-Diagnostic Function .

• 1. Problem verification:

  1. Clear the hard error codes - Refer to: How to Troubleshoot the Audio SystemAudio System Self-Diagnostic Function .

  2. Turn the vehicle to the OFF (LOCK) mode then the ON mode.

  3. Check for hard error codes - Refer to: How to Troubleshoot the Audio SystemAudio System Self-Diagnostic Function .

  Is DTC 1002 indicated?

  YES 

  Replace the SD card module .

  NO 

  Intermittent failure, the system is OK at this time.

NOTE: 

• Check the vehicle 12 volt battery condition first .
• This navigation DTC sets when there is a problem with the SD card module.
• Before you troubleshoot, make sure to follow the General Troubleshooting Information .
• Check any official Honda service website for more service information about the navigation system.

• 1. Problem verification:

  1. Clear the hard error codes .

  2. Turn the vehicle to the OFF (LOCK) mode then the ON mode.

  3. Check for hard error codes .

  Is DTC 1002 indicated?

  YES 

  Replace the SD card module .

  NO 

  Intermittent failure, the system is OK at this time.