Test Procedure

1. Tailgate Lower Trim Panel - Remove - Refer to: Interior Trim Removal and Installation - Pillar Areas Interior Trim Removal and Installation - Tailgate Areas Interior Trim Removal and Installation - Cargo Areas Interior Trim Removal and Installation - Rear Side Area Interior Trim Removal and Installation - Door Areas
2. Power Tailgate Closer Motor - Test

Courtesy of HONDA, U.S.A., INC.

1. Disconnect power tailgate closer unit connector A.

2. Test the motor operation by connecting 12 volt battery power to the tailgate closer unit connector A terminal No. 2 and ground to the terminal No. 1. To prevent damage to the motor, apply 12 volt battery power only momentarily. The motor should run.

3. If the motor does not run or fails to run smoothly, the power tailgate closer motor is faulty; replace the tailgate latch (B) .
3. All Removed Parts - Install - Install the parts in the reverse order of removal.