DTC 84-91: Front Passenger's Weight Sensor Not Calibrated
NOTE:
- Before doing this troubleshooting procedure, find out if the vehicle was in a collision. If so, verify that all the required components were replaced with new components of the correct part number, and that they were properly installed .
- Before doing this troubleshooting procedure, review SRS Precautions and Procedures and General Troubleshooting Information .
| DTC Description | DTC |
|---|---|
| 84-91 Front passenger's weight sensor not calibrated |
DTC (SWS)
- 1. Problem verification:
1. Clear the DTCs with the HDS .
2. Turn the vehicle to the ON mode, then wait for 10 seconds.
3. Check for DTCs with the HDS .
DTC Description DTC 84-91 Front passenger's weight sensor not calibrated Is DTC 84-91 indicated?
YES
The failure is duplicated. Do the front passenger's weight sensor unit initialization .
NO
Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures . If another DTC is indicated, troubleshoot the DTC.