Steering Gear: Remove & Replace

Includes: Adjust toe-in on Rack and Pinion type Steering Gears. NOTE: Deduct .4 if alignment is also performed. DOES NOT include transfer of components.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
2.0L Eng	Includes: Validation with use of Scan Tool.	9.7		B
Combination Procedure: STEERING ANGLE SENSOR: Calibrate:
	Includes: Additional time for use of scan tool to perform this procedure.	0.3		B
Combination Procedure: TIE ROD &/OR END: Replace:
Each		0.1		B