Removal - Front Door

Courtesy of CHRYSLER GROUP, LLC

1. Raise the window to the end of travel position.
2. Disconnect and isolate the negative battery cable.
3. Remove the door speaker. Refer to SPEAKER, REMOVAL AND INSTALLATION .
4. Undo the nuts (1a) and remove the front guide (1b) through the speaker compartment.

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

1. Position the front guide (1b) and tighten the nuts (1a) to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
2. Connect the negative battery cable.
3. Move the window to check that the guide is working.