Removal And Installation: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Remove the door. Refer to DOOR, REMOVAL AND INSTALLATION .
2. Remove the bolts (1).
3. Remove the hinges (2).

   Courtesy of CHRYSLER GROUP, LLC

4. Remove the bolts (1) securing the hinges (2) to the body.

INSTALLATION

1. Position the hinges and install the bolts without tightening them.
2. Install the door. Refer to DOOR, REMOVAL AND INSTALLATION .
3. Adjust the door position. Refer to DOOR, ADJUSTMENTS .
4. Connect the negative battery cable.

Exposed Metal Treatment

1. Apply an epoxy or anti-corrosion primer to any bare metal exposed during hinge service procedures.
2. Allow the primer to dry in accordance with the manufacturer recommendations.
3. Apply touch-up paint over the primed area.
4. Allow the touch-up paint to dry in accordance to the manufacturer recommendations.