Removal And Installation: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Remove the wheel. Refer to REMOVAL AND INSTALLATION .
2. Remove the screws (1a) attaching the splash shield (1b) to the rear fascia.
3. Release the retaining washers (2a) using a trim stick or equivalent.
4. Release the push pin fasteners (3a).
5. Remove the splash shield (1b).

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

1. Position the splash shield (1a) and seat it in place.
2. Install the push pin fasteners (2).
3. Install the retaining washers (3).
4. Tighten the screws (4a) attaching the splash shield (1a) to the rear fascia.
5. Install the wheel. Refer to REMOVAL AND INSTALLATION .