LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior >> Seats, First Row >> Seat, Front >> Removal And Installation >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING:

Disable the airbag system before attempting any component diagnosis or service of the front seats, when equipped with front seat air bags. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions may result in accidental airbag deployment and possible serious or fatal injury.

GC0194557Courtesy of CHRYSLER GROUP, LLC
  1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to SEATS, FIRST ROW, WARNING .
  2. Remove the headrest.
  3. Move the front seat to the full forward position.
  4. Remove the rear seat bolts (1a).
  5. Move the front seat to the full rearward position.
    GC0195091Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect and isolate the negative battery cable and wait two minutes for the system capacitor to discharge before performing further diagnosis or service.
  7. Remove the front seat bolts (1a).
  8. Tilt the seat (4) up and disconnect the wire harness connectors (3a) then remove the seat.
scientia non olet · About LEMON Manuals