Fixed Seatback: Removal
- Remove the rear seatback from the vehicle. Refer to SEAT BACK, REAR, REMOVAL AND INSTALLATION .
- Raise the headrest (1). Press the releases (2a and 2b) and remove the headrest.
- Position the trim, release the retainer (1b) and pull out the headrest guide (1a).
- Open the J-strip (1a and 1b) at the lower edge of the seat trim.
- Open both side zippers (2b).
- Raise the trim and remove the hard back panel (1a).
- Pull the cover (1a) from the foam (1b) and remove the hog rings (2a).




