LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior >> Seats, Rear >> Seat Back, Rear >> Removal And Installation >> Split Seatback >> Installation

Split Seatback: Installation

  1. Install the 60% seatback (2) into the center pivot bracket (3).
  2. Install the rear seatback bolt (1) and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
    GC0198766Courtesy of CHRYSLER GROUP, LLC
  3. Install the 40% seatback (2) on the pivot shaft (3).
  4. Install the rear seatback bolt and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  5. If equipped. connect the wire harness connectors for the seat back heaters.
  6. Install the rear seat bolsters.
  7. Install the rear seat bolster. Refer to BOLSTER, SEAT, REMOVAL AND INSTALLATION .
  8. Install the rear seat cushion. Refer to SEAT CUSHION, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals