Removal And Installation: Installation
NOTE:
Right side shown in illustration, left side similar.
NOTE:
Check that the antenna amplifier is not damaged.
- Position the antenna amplifier (1b) on the vehicle.
- Connect the wire harness connections (2a, 2b, 2c) to the antenna amplifier.
- Remove the antenna amplifier to body bolt (1a) and remove the antenna amplifier (1b) from the body.
- Install the C-pillar panel trim. Refer to PANEL, C-PILLAR TRIM, REMOVAL AND INSTALLATIONPANEL, C-PILLAR TRIM, LOWER, REMOVAL AND INSTALLATION .
- Connect the negative battery cable.
