Removal And Installation - Center Console Media Hub: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- With a suitable tool, gently pry the media hub bezel (1a) from the floor console, releasing the integral latches (1b)NOTE:
Be certain to take the proper precautions to prevent the floor console and instrument panel from receiving cosmetic damage during the following procedures.
- Disconnect the wire harness connectors (2a) and remove the media hub from the vehicle (1a).
- Working from the back side of the media hub bezel (1c), release the retaining clips (1a) and remove the bezel from the media hub (1b).
