Removal And Installation - Instrument Panel Center Speaker: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the speaker (2a) on the instrument panel and connect the wire harness connector (1).
2. Install the speaker (2a) on the instrument panel.
3. Install and securely tighten the two speaker screws (2b).

   Courtesy of CHRYSLER GROUP, LLC

4. Install the speaker grill (1a) on the instrument panel. Be sure the integral latches (1b, 1c) are fully engaged.
5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.