LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating & Air Conditioning >> Controls >> Actuator, RECIRCULATION Door >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0193105Courtesy of CHRYSLER GROUP, LLC
  1. Connect the actuator wire harness connector (1).
  2. Position the actuator (2a) and engage the coupling (2b).
  3. Install and securely tighten the three actuator to HVAC housing screws (3).
  4. Install the right front floor air outlet. Refer to OUTLET, AIR, REMOVAL AND INSTALLATION .
  5. Install the glovebox. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  7. Initiate the Actuator Calibration function using a scan tool. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals