LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating & Air Conditioning >> Controls >> Module, Power, Blower Motor >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0198944Courtesy of CHRYSLER GROUP, LLC
  1. Position the blower motor module (2a) into the HVAC housing and securely tighten the screws (2b).
  2. Connect the blower motor module wire harness connectors (1).
  3. Install the right front floor air outlet. Refer to OUTLET, AIR, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals