LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating & Air Conditioning >> Controls >> Sensor, Temperature, In-Car >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

NOTE:

Take the proper precautions to protect the face of the steering column opening cover from cosmetic damage while performing this procedure.

GC0197836Courtesy of CHRYSLER GROUP, LLC
  1. If removed, place the grille (1a) into position and attach the retainers.
  2. Connect the humidity sensor wire harness connector (2a).
  3. Position the temperature sensor (2b) and install the humidity sensor screws (2c).
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals