Removal And Installation: Removal
WARNING:
Disable the airbag system before attempting any steering wheel, steering column or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable and wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in accidental airbag deployment and possible serious or fatal injury.
NOTE:
Take the proper precautions to protect the front face of the instrument panel cover from cosmetic damage during this service procedure.
- Remove the instrument panel cover. Refer to COVER, INSTRUMENT PANEL, REMOVAL AND INSTALLATION
.
- Remove the retainer (1) securing the instrument panel duct assembly (2) to the outlet.
- Using the appropriate tool, disengage the retaining pins (1a).
- Remove the instrument panel duct assembly (3a) by releasing the retainers (3b).
