Removal And Installation: Installation
NOTE:
The cabin air filter is labeled with an arrow to indicate air flow direction through the filter. Make sure to properly install the cabin air filter. Failure to properly install the filter will result in the need to replace the filter sooner than required by design.
- Install the cabin air filter (1a) into the HVAC housing (1).
- Install the cabin air filter cover (1a) onto the HVAC housing and install the retaining clip (1b).
- Engage the wiring harness (2a) to the retainers (2b).
- Install the right front floor outlet. Refer to OUTLET, AIR, REMOVAL AND INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
NOTE:
Make note of the air flow direction (1b).
