LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Bumpers >> Bumpers >> Fascia, Rear >> Removal And Installation >> Rear Fascia Side Molding >> Installation

Rear Fascia Side Molding: Installation

  1. Install the side molding into the rear fascia.
  2. Slide the molding in place and install the retaining screw and tighten securely.
  3. Position the wheelhouse splash shield and install the retaining screws and the retaining push pins.
  4. Install the tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  5. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals